Archive

Category Archives for "Boots Reviews For Your Specific Job"

The 5 Best Breathable Summer Work Boots

Keeping cool during the summer months can be a challenge when you work in construction, but one of the most effective ways to beat heat exhaustion is to put away your winter work boots, and swap them for a pair of durable hot weather work boots.

Switching to lighter work boots during the summer months can help you stay cooler, prevent blisters, reduce foot fatigue, and help to prevent conditions like athletes foot.
Read on for more information on the best breathable work boots to keep your feet cool and safe this summer.

Boot

Design

Comfort &
Protection Rating

Price

Timberland Boot brown

TOP PICK

Timberland PRO Boondock 6" Non-Insulated

BEST OVERALL

$$

Boot Utility Keen

Keen Utility MT Vernon 6"

$$

Caterpillar Boot covex

Caterpillar Men's Convex Mid Steel Toe

$

Skechers for Work Men's Blais Hiking Shoe

$

Keen utility boot

KEEN Utility Men's Pittsburgh

$$

Work boots for summer time

Why do you need hot weather work boots?

Work boots might not be the most obvious article of clothing to change during the summer, but as there are more sweat glands in your feet than anywhere else in your body, swapping your regular boots for a pair of breathable steel toe work boots could help you to stay cool and prevent foot problems.

Men working in hot weather with metal

What’s special about summer footwear?

Breathable steel toe work boots meet all of the the same industry safety standards as regular boots. However, regular work boots are designed to insulate your feet against the cold, while their cooler cousins have been designed to promote airflow to cool your feet, while remaining water tight.

Because of the complexity of creating a strong durable, water tight boot which is also highly ventilated, many warm weather boots resemble hiking boots or have much shorter ankle protection.

Athletes foot and other issues associated with hot feet

Let’s face it, no one would have sweaty feet by choice. They feel uncomfortable, smell terrible, increase your risk of blisters, and can damage the inside of your shoes. However, sweaty feet can also have medical implications. Most commonly, athletes foot.

Athletes foot is a bacterial infection commonly associated with sweaty feet and can be caused by naturally occurring bacteria multiplying out of control in the warm, moist environment caused by sweaty work boots.

Athletes foot and doctor

Doctor dermatologist examines the foot on the presence of athlete’s foot

If left untreated this condition can spread to other people and areas of your own body, such as your hands. In severe cases, the damaged skin can contract a further severe bacterial infection called cellulitis which should be of particular concern to anyone with diabetes.

Choosing the right summer work boot

Choosing the right work boot to keep your feet comfortable and safe can be a complicated business at the best of times, but when you’re looking for work boots for summer time or the best work boots for sweaty feet, there are some additional requirements that you should consider:

Ventilation is important

Is the boot designed with ventilation in mind? Is it made from breathable material? Is it insulated? You will want a boot designed to circulate air around your feet to keep them cool.

Toe cap - What's it made of

Steel toe caps tend to conduct heat during the summer, meaning that a steel toe cap boot may be warmer than a composite toe cap boot.

types of safety toes

Which is best when it comes to hot weather? 

Removable insoles

If you feet do sweat on a particularly hot day, you may find that your shoes are still slightly damp the following day, making them a perfect breeding ground for bacteria. To prevent this, buy boots with a removable insole that you can swap, allowing the damp insoles to dry thoroughly.

Comfort and fit

While comfort and fit is important in any work boot, it is doubly so in summer weight ones as you will want to wear lighter socks. Ideally you want a boot that is supple enough straight out of the box to require very little breaking in. If you buy your summer boots early, remember to break them in using a lightweight sock to prevent over stretching.


5 of the best summer work boots available

Timberland PRO Men's Boondock 6" Waterproof Non-Insulated

Boot boondock Timberland brown

Timberland’s PRO boondock boots are one of the more comfortable work boots in our list with a composite toe cap and a rubber toe protector. They have removable insoles and no insolation, ensuring that the boots remain as cool as possible while still being an extremely sturdy boot.

While fairly resilient it is worth noting that these boots aren’t officially puncture resistant. The soles also have a reputation for wearing quickly and are more water resistant than water tight.

Pros

  • check
    Removable Insoles
  • check
    No insolation
  • check
    Composite toe (won’t set off metal detectors)
  • check
    Extremely sturdy
  • check
    Extra rubber toe protector

Cons

  • check
    Not puncture resistant
  • check
    Sole wears out quickly
  • check
    Not watertight once broken in

Keen Utility Men's MT Vernon 6" Waterproof

Keen utility work boot

The Keen MT Vernon’s are a medium to heavy duty boot with a focus on comfort. They have a unique membrane designed to remove moisture without allowing water in and an asymmetrical steel toe designed to give a more comfortable fit.

Although the MT Vernon’s tend to be very comfortable, break in quickly, and stand up well to a challenging work environments. They also tend to show significant wear after only 9 months, so they do need to be properly maintained in order to prolong their life.

Pros

  • check
    US built
  • check
    Light for a steel toe boot
  • check
    Shaped steel toe makes them very comfortable
  • check
    Available in wide fits
  • check
    Watertight

Cons

  • check
    Show significant wear relatively quickly
  • check
    Width runs small


Caterpillar Men's Convex Mid Steel Toe

Caterpillar Convex

The Caterpillar Convex boots look and feel more like an athletic boot then a work boot. They tend to wear in quickly and remain comfortable in hot weather thanks to mesh panels which allow air to circulate.

Although these boots look like a sport boot, they are steel toed so will feel quite heavy to anyone not used to them. They are also one of the less rugged boots on our list and shouldn’t be considered for heavy industrial work.

Pros

  • check
    Fashionable
  • check
    Comfortable
  • check
    Good air circulation
  • check
    Good slip resistance

Cons

  • check
    Only suitable for lighter work
  • check
    Non-removable insoles
  • check
    Water resistant rather than water tight

Skechers for Work Men's Blais Hiking Shoe

Sketchers

Skechers Blais is a hiking shoe rather than a work boot, but it does meet industry standards making it a good alternative if you want something a little lighter. This is not a heavy duty work shoe, but is more than up to the challenge of lighter duty work.

While the shoe itself looks like a normal hiking shoe, it has a steel toe which does make it very heavy, this can also cause some rubbing if you have wider feet.

Pros

  • check
    Memory foam removable insole
  • check
    Very comfortable straight out of the box
  • check
    Watertight
  • check
    Fashionable
  • check
    Good air circulation
  • check
    Very Low Cost

Cons

  • check
    Glued seams can come loose over time
  • check
    Steel toe makes the shoe unusually heavy
  • check
    Padding around the steel toe is a little thin

KEEN Utility Men's Pittsburgh Steel Toe Work Boot

Keen men's Pittsburgh

KEEN Pittsburgh’s are a medium duty work boot which looks and wears like a hiking boot. The boot is designed with a special membrane which draws moisture away from your feet while remaining waterproof. They are also designed for comfort, with lots of arch support and a asymmetrically shaped steel toe cap.

While practical and comfortable, the KEEN Pittsburgh’s aren’t the hardiest of boots and do show significant wear after around 6 months of hard use. However, proper care may prolong their life.

Pros

  • check
    Comfortable fit
  • check
    Shaped steel toe
  • check
    Designed to allow moisture to escape
  • check
    Fashionable​​​​

Cons

  • check
    Wear out quickly
  • check
    Are water resistant rather than water proof

And the winner is...

Choosing the best summer work boot for your needs often requires you to balance the boots resilience to wear and the elements, with its ability to keep your feet cool and dry. However, Timberland’s PRO Boondock work boots stand out as the best breathable work boots on this list because they tick both of these boxes.

The boots are sturdy and relatively hard wearing, have removable insoles that can be swapped to keep the inside of your boot dry and fresh, have no insulation so they will remain relatively cool, and have a composite toe which is unlikely to conduct as much heat. As such, they are the perfect compromise between summer comfort and practicality.

Best Farm Boots – Rubber and Leather Reviews

Working on farms is a tough job and you need to trek through many types of terrains every day. Without the right boots, you could find your feet damaged and even water coming into the boot. Having to work with wet or damaged feet all day will make the job that much tougher.

The best farm boots are designed to ensure you have comfort with every step you take and to keep your feet protected from everything nature has to offer.

Additionally, we have included the most important features that you should look out for and the knowledge of these features could ensure that you get the best value for your money.

Boot

Design

Comfort &
Protection Rating

Price

TOP PICK

Georgia Men's Giant Wellington

$$

Ariat Sierra Wide Square Steel Toe

$$

Original Muckboots Adult Chore Hi-Cut

$

Red Wing Heritage 6" Beckman Round Toe

$$$

Wolverine Men's
Moc-Toe 6"

$

Georgia Pull-On
Mud Dog ST

$$

How the best rubber boots for farm work could simplify life and save you some money:

Before we dive into the features, we need to address one key question and many people are torn between choosing leather or rubber for their boots. Depending on the location of your estate, this will depend, but the season and your budget can also play a huge part in determining which work boots you should be wearing.

For wet conditions, the rubber will generally be the best option; however, rubber can also be treated to be waterproof. We have looked at the best boots for farming work and how they could simplify your life.

Rubber boots are also a little lighter and more affordable, but you will certainly sacrifice some durability for a cheaper price. Rubber is a great option, but you can easily combine these two and stick with a leather upper and rubber outer sole. The rubber outer sole is extremely good at providing grip on the most daunting of surfaces.

Overall, we would recommend both leather and rubber work boots, but the combination of both will give you the best of both worlds. More and more top brands are reverting to premium leather for their footwear, as it is one of the most durable materials.

Key features to note when buying boots for your ranch:

Farm and ranch boots do differ in some ways from work footwear that you would use for jobs like construction. We have come up with a list of the most important features that you should keep an eye out for to ensure that you get the best possible boots for your job. These features might spike up the price, but having quality and comfort will definitely be worth that price tag.

2 farmers and cropper

Materials:

We have already mentioned why rubber and leather are both good options for farming, but how does synthetic leather come into the fray. Synthetic leather is a weaker form of natural leather that looks the same but has less durability.

When looking at the materials of your boots, you should try to stay with leather or rubber. High-cut rubber boots are perfect for grassland areas and they offer more protection. This footwear design will keep your feet and shins dry and protected and are a top choice for best rubber boots for farm work.

Outer sole:

While it is always important to look at the outer sole, this becomes imperative when working outdoors on your acreage. Weather conditions are definitely unpredictable and you will need to keep working in wet weather.

Ensuring that your outer sole is slip resistant is one of the most important things you could do. For this, we would recommend rubber as the base materials and wide or larger lugs on the outside. The larger lugs should have space between them that will offer some additional grip.​

footwear sole with tread

Inner lining:

On the ranch or farmstead, the inner liner plays a huge part. Not only does it keep the water from coming in if the leather has failed, but it also wicks away the moisture. The liner is designed to help resist any possible abrasions as well.

Gore-Tex is generally the best for jobs that require you to walk through arduous terrains. If you find yourself in the colder climates , you might want to consider Thinsulate, which is designed to keep you warm as well.

How Comfortable is the Inner sole:

Depending on the hours you spend working on the farm, the inner sole will also play a huge part. The top inner soles are generally made from memory foam, but we also understand that this could be costly. EVA is definitely the next best option and while it does not keep the shape of your feet, it will mold to that specific shape. PU inserts are the most affordable and while they are still great, they do not offer as much comfort.

Waterproof capabilities:

Lastly, you will need to ensure your work boots are waterproof. Nothing is worse than having water seep into the boots at the start of the day and having to tread around ranch or barn with feet wet. This could potentially lead to bacterial infections and just spoil the entire working day.

farmers with cowers in paddock

Tanned leather is definitely the best option to keep water out, but rubber is naturally impervious to water and does not absorb it either.

If your leather boots have not been tanned, they will start absorbing the water. This can lead to the leather rotting if it isn’t dried out, or it will harden and start to crack.
(Full article on best waterproof boots)

Support System:

The support system commonly refers to the shank of the boot. This will offer additional support that complements the materials. Carbon fiber is generally a good choice since it is lightweight, but if you are not spending as much time on your feet around the paddocks, you could consider a steel shank. The steel shank offers great stability. The final option is the nylon shank and this offers decent support without increasing the weight or spiking the costs too much.

Since most ranches have uneven and muddy terrains that you will need to walk on, the shank will definitely be handy. Should you experience any slips or even step on uneven surfaces, the shank will keep your ankle from twisting and offer some support to help reduce the fatigue


Top 6 work boots for working on a ranch in 2018:

Now that you understand a little more about the importance of the specific features, you might be wondering what the best boots for farm work are. To help you and simplify the searching process, we have selected 6 top-rated boots. These farm work boots have all been picked based on their performance and the features that they include.

Georgia Men's Giant Wellington Ranch Work Boots

Last but certainly not least, we have the Georgia Men's Giant Wellington Work boot. It also features a high-cut design with no laces that need to be done up. The majority of the boot is constructed from leather, while the outer sole features wide lug rubber to keep anyone from slipping on water or oil.

Flexed notch corners allow you to have additional flexibility when moving on even surfaces, but these boots should also be ideal for horse riding on the farm. The insole and midsole are both cushioned to ensure additional comfort and reduce the fatigue from prolonged working hours.

Unfortunately, the work boot is quite heavy and the steel shank does ramp up the weight a little. This shank will offer great support and ensure that twisting injuries never occur. Overall, they are are really affordable, not the cheapest or the most expensive, but will fit most budgets. We would definitely recommend them for the value and support they offer while working on your property or acreage.

Pros

  • Great flexibility
  • Durable from top to bottom
  • Slip resistant on water and oil
  • Well priced
  • A steel shank for great support

Cons

  • The boot is quite heavy
  • Make sure you choose a size that's slightly smaller as sizes can run large

Ariat Men's Sierra Wide Square Steel Toe Work Boot

Starting our list is the Ariat Men’s Sierra Wide Square Steel Toe work boot. These are designed with a tanned leather upper and includes a rubber outer sole that ensures optimal grip for nonslip and safety. The boot also features a unique Western style with a square steel toe for added protection.

Advanced Torque Stability Technology is included with a composite fork shank. This amplifies the stability you have when walking on those uneven surfaces and it will also keep you protected from accidents that could happen when your vision is impaired in tall grass. The ATS technology is found in the inner sole and will improve the overall comfort.

With large lugs on the outer sole, you will not be slipping on wet grass anytime soon and the addition of the ASTM F2413-11 rated steel toe, your feet will definitely be protected in virtually any situation. These boots are a little heavy with the steel toe, but the design is stylish.

Pros

  • The boots are really affordable
  • A gel cushioned insole ensures comfort
  • ATS technology offers great support
  • Safety toe
  • The composite fork shank reduces the weight

Cons

  • Some inconsistencies with the stitching on the heel cups
  • They are also quite heavy

The Original MuckBoots Adult Chore Hi-Cut Boot

The Original MuckBoots Adult Chore Hi-Cut Boot is designed from leather and nylon. While this does reduce the durability somewhat, it will ensure that you stay dry in the wettest and muddiest of conditions. The high-cut design offer protection all the way up to your knee for those high grasslands.

The heel is a little wider than you would find in many other farming boots and this is purposefully done to add stability without increasing the weight. The boot also features a warm inner lining that could keep you warm in subzero temperatures on those early cold mornings in the barn or around the paddocks.

We love the design and the wider lugs on the outer sole. This ensures you will be less likely to slip. The additional kick rim is perfect for walking or stubbing your toes against heavy machinery or rocks when your vision is impaired. If you have larger feet, the boot should also be perfect with an opening of 17.75-inches. These boots are quite affordable and would be perfect for men and women on the farm. (For a detailed guide to the best womens work footwear click here)

Pros

  • Lightweight design
  • Fully waterproof
  • Unisex design 
  • Slip resistant outer sole with large lugs

Cons

  • The lack of a shank limits support
  • No leather reduces the durability
  • The overall sizing is quite large

Red Wing Heritage Beckman Round 6" Boot

Red Wing is one of the top brands preferred by many. Their work boots are not only durable but stylish as well. The Beckman Round 6" is designed from premium leather and features a tanned coating to keep your feet dry.

The outer sole is made from rubber, with large lugs that have smaller lugs to ensure you have more stability and you’ll be less likely to slip or fall when getting in and out of the tractor. It also includes a large, bulging plain toe to ensure comfort and the inner lining will not only wick away moisture but also ensure you do not have to deal with abrasion.

These boots have a timeless feel and design and while they will be perfect for you on the farm, they can be used for any other projects as well. Unfortunately, they are quite expensive and the sizing is a little too big. We suggest trying half a size smaller than your normal size.

Pros

  • Timeless design
  • Water resistant tan on the leather
  • They have large rubber lugs to keep you from slipping

Cons

  • They are quite expensive
  • The sizing is a little big

Wolverine Men's Moc-Toe 6" Work Boot

If you love a padded collar, the Wolverine Men’s Moc-Toe 6” Work Boot should be a great option. It features a Premium leather upper with a stylish white crepe outer sole. This is sole is not quite as durable as rubber, but since it is a little softer, it offers more resistant to shock and impact. This could also help reduce the tension on your feet.

The padded collar is ideal for extra cushioning, but it also helps to keep your feet warm in colder conditions. The leather has been tanned and this will make the shoes resistant to weather, but they aren’t ideal for walking through deep puddles.

The nylon shank offers some support and will fight fatigue, while you will have the option to add a steel toe(best steel toe footwear) if needed. This boot is perfect for ranch workers and it is actually really affordable. We would definitely recommend this for farm work. They will also be perfect for leaving the ranch and heading to the town.

Pros

  • The price
  • Comfortable outer sole
  • The padded collar
  • Nylon shank to help fight fatigue
  • Stylish design makes the multifunctional

Cons

  • They are not waterproof
  • The optional steel toe will spike the costs
  • The lace eyelets aren’t as durable as the rest of the boot

Georgia Men's Pull-On Mud Dog ST Comfort Core Work Boot

Have you ever felt you are wasting time with laces? Well, the Georgia Men's Pull-On Mud Dog work boot is designed with a pull-up features that eliminate the need to tie lace. They are stylishly designed from leather and rubber, with the leather reaching all the way to the top.

On the inside of these work boots, they have included a lightweight Comfort Core insole and this is essentially EVA that will mold to the shape of your feet and make this footwear more comfortable. The insole is completely removable and you could easily replace it with your own memory foam inner sole if you are struggling with supination and pronation.

A TPU shank has been included, which offers stability and flexibility when trekking through uneven grounds on the ranch. These boots are also affordable and the high-cut design means that your legs will also be protected from the terrain. They are waterproof and perfect for wet conditions trekking through the paddocks.

Pros

  • The price
  • Steel toe for additional protection
  • Flexible and supportive shank

Cons

  • The sizing runs small

Our chosen Winner is...

With all the brands and technology, choosing the best boots for working on your farm is tough, but choosing the number one boot is the toughest. These boots are also special and unique and they offer something to anyone.

Both the Georgia boots are really well designed, but we have chosen the Georgia Boot Men's Giant Wellington Work Boot as the winner. When compared to the other farm working footwear, this one stands out with the full leather design and the steel toe. These boots are affordable and it will keep you dry in the rain and muddy conditions as well.

We would like to thank you for reading this article. We hope that you have found one of these to help you on your ranch. If you think we have missed any of the best farm boots you have used, we would like you to drop a comment below and let us know why you have chosen it.

Best Cheap Work Boots and Where to Buy Them

Do you know how to find a pair of cheap work boots that will last you? Don’t worry, we’re here to give you a comprehensive breakdown for buying quality work boots even when you’re on a budget.

Just because you’re not able to spend a few hundred dollars on a pair of boots that you’re coworker friend overpaid for doesn’t mean you have to suffer. Finding the right footwear if you’re on a budget can be challenging, but not impossible.

In this article, we’ve taken all of the guesswork out of it and given you the key features to look for as well as detailed reviews of the five best cheap work boots that will keep your wallet happy and feel like you’re wearing the high-end stuff.

How to Find Affordable Work Boots

Long Lasting Durability

Being on a budget, the number one feature you’re going to want in your footwear is durability (most durable work boots guide here) Even if you save money on a pair of really cheap boots, it’s only going to come back to bite you a few months down the road when they’ve fallen apart around your feet.

There are a few things to look for that help to maximize durability, and leather is number one. Rugged full grain leather is a battle tested material that has been proven to stand up to even the most punishing of jobs. This is a must have.

Second, you’ll want soles that are equally as durable. Thick rubber soles are perfect for taking the punishing blows day in and day out without wearing down quickly. Since it’s the most popular material soles are made from, you shouldn’t have a problem here.

Lastly, you’ll want to see how the sole is joined with the rest of the boot. The two main types of construction you will see is Goodyear welt and cement. The Goodyear welt method is far superior and incredibly long lasting. You can even replace the soles if they wear out.

The Best Place to Buy Work Boots

In your previous shopping experiences, you’ve probably noticed that items can be priced differently from store to store even though they’re exactly the same. The same is true when it comes to boots.

If you go to any big name brand stores, you’re almost guaranteed to get ripped off and end up paying 30-40% more than you should. Even some local “discount” stores offer prices that are far from a bargain but try to hide it with sale signs everywhere.

Without a doubt, the best prices you’re going to find will be online. To test his theory out, we urge you to find any pair of boots at a local store and look them up online to compare the prices. It may take longer to get to you, but the savings are usually worth the wait. Making the web the best place to buy work boots.

Working in Comfort

Comfort is going to be one of the hardest features to find when you’re on a budget, but it can be done. Everyone has their limit, and working 8-10 hour days five days a week with uncomfortable feet may be it.

The first and most important comfort feature that you want to target is the insole. Ideally, it will be removable so that you can replace it with a higher-quality one if you absolutely must. The insole will give your feet some cushioning and slight support.
(Top work footwear insoles here)

The next feature, depending on your feet, is going to be arch support and shock absorption. If you’re standing and walking around all day, arch support helps to alleviate fatigue while shock absorption protects your joints from the jarring blows of the ground.

Lastly, you’ll want to make sure that the boots are breathable. If you’re exposed to the sweltering sun, you’re going to want to make sure your feet don’t get sweaty. Breathable mesh helps with ventilation so you stay nice and dry.
(Most comfortable work boots Full Guide Here)

Safety Features

This is specific to job requirements and personal preferences. Some jobs, depending on the line of work, require their workers to wear boots with certain safety features.

Safety Toe

The most popular and common safety quality is the protective toe cap. It can be made from steel, aluminum, or even synthetic materials. If you’re exposed to the risk of dropping bone breaking objects onto your feet, you’ll want this.

Electrical Hazard

Live wires and open circuits are serious safety hazards on the job. If you’re an electrician or you work around power equipment, it’s recommended that your work boots have some level of shock protection.


Reviews of Good Quality Cheap Work Footwear

EVER BOOTS “Tank” Men’s Soft Toe Full Grain Leather Work Boot

These easily come in as one of the best priced work footwear on this list. The sleek full grain leather design gives them the appearance of high-end footwear while also remaining casual enough to wear off the clock if you so choose.

You’ll notice the thick rubber soles with aggressive tread lines that can grip any number of surfaces your job puts you up against. Even better, they come with a 3-month warranty on the leather and soles, though you’re not going to need it.

Thanks to the Goodyear welt, you can be sure these boots were built to stick around for a while. Lastly, along the inside, your feet will enjoy the comfort of a removable insole that makes it easy to stand for hours on end.

Pros

  • Durable slip resistant soles
  • Lightweight casual design
  • Padded strong safety toe area
  • Great Price​​​​
  • Quick break in

Cons

  • Low quality laces
  • Leather prone to scuffing

Maelstrom Men's LANDSHIP 8 Inch Military Tactical Duty Work Boot

If you work in law enforcement or any other line of work that requires heavy duty, athletic boots, these are for you. They have a striking appearance with their tall design and combination of both laces and a side zipper for easy on and off.

They’re constructed with a quality leather and breathable mesh which allows your feet to flex without restriction. To add to the breathability, they even come with built in metallic vents near the slip resistant rubber soles for added ventilation.

Between the shank and multiple layers of support in the midsole, your feet will stay fatigue free all day long. These are some good cheap work boots that come packed with high-end features and a very reasonable price tag.
(For a full guide to the 7 best tactical boots click here)

Pros

  • Lightweight responsive design
  • Superior breathability
  • Quality ankle support
  • Full foot comfort with anti-fatigue

Cons

  • Doesn’t hold up well with heavy use
  • Stitching frays easily

Timberland Men's White Ledge Waterproof Boot

These boots were built to withstand brutal outdoor conditions. High-quality leather fully wraps around them which also provides a solid waterproof defense in the event that working conditions are less than dry. For reinforcement, all of the seams are sealed which adds durability.

The thick laces are completed with rustproof eyelets and speed hooks which make these boots easy to get on and off. At the top, your ankle is comforted with a padded and gusseted tongue that also serves to keep debris and moisture out.

Timberland really hit the nail on the head with the rubber soles and multi-directional tread patterns that can keep you grounded on uneven terrain. They’re relatively inexpensive work boots for the number of features they come loaded with.

Pros

  • Easy to clean
  • High-quality traction on most terrains
  • (best 5 waterproof boots on the market)
  • Complete waterproofing 
  • Full foot and ankle protection
  • Long lasting durability

Cons

  • Long break in process
  • Minimal comfort features
  • Treading wears out fast
  • Eyelets prone to breaking

Skechers USA Men’s Mariner Utility Boot

Skechers might not be the first brand that comes to mind when you think of cheap work boots, but here’s why they should. Firstly you’ll notice the thick lugged sole with a wedge heel that offers exceptional traction and shock absorbing properties.

Thick, durable leather encases the body with a reinforced upper and seam sealing to keep water out. They’ve also incorporated a comfortable padded layer around the low cut ankle so you don’t have to worry about discomfort and blisters.

Skechers is well known for their comfortable insoles and they keep that reputation even with these work boots. By the end of your shift, you’ll hardly even remember that have you have them on and may not even want to take them off.

Pros

  • Good for work or casual wear
  • Lightweight design
  • Long lasting soles
  • Spacious toe area
  • High-quality comfort

Cons

  • Prone to carrying a chemical smell
  • Sizes can run narrow
  • Not the best slip resistance

GW Men's 1606ST Steel Toe Work Boots

The biggest standout feature about these KINGSHOW boots is the thick yet supple nubuck leather. It gives them a sleek, professional grade look while offering all of the heavy duty durability that leather should have.

Not only is the leather construction built to last, but the thick slip resistant rubber soles are joined to the body of the boots with a Goodyear welt. You can travel through the most punishing terrain without the worry of ruining your footwear.

Of course, we can’t forget to mention the steel toe protective caps ready to absorb any and all damaging impacts and keep you safe. Of the best affordable work boots we’ve reviewed so far, these carry the lowest price tag if you’re on a really tight budget while still wanting some great features.

Pros

  • True to size
  • Strong toe protection
  • Comfortable around the ankle
  • Extremely affordable!

Cons

  • Leather lacks durability around the toe
  • little arch support
  • Could have better ventilation for hot weather conditions

The Best Bang For Your Buck.....

By now, you’re probably pretty impressed with the collection of cheap footwear we’ve compiled for this review article. It was a fierce competition packed with budget friendly boots and high-end features that are commonly found in the most expensive brands.

After much consideration, our selected winner for the best cheap work boots is the Ever “Tank” Men’s Soft Toe Full Grain Leather Work Boot. Starting with the rugged full grain leather and Goodyear welt, they offer superior durability that’s guaranteed to withstand month after month of grueling use.

They come equipped with a removable insole that offers enough comfort to keep you happy, but it also gives you the option to replace them with something better if you want. With the internet being the best place to purchase working footwear, these are one of the lowest online price tags you’ll find. No matter your needs, these EVER BOOTS won’t disappoint.

Best Lineman Pole Climbing Boots – Great Traction

As a lineman, you come face to face with some unique challenges that aren’t all that common across other occupations. Whether you’re working at ground level or up high on the powerline poles, your work boots need to stand up to rough use on the daily.

In this article, we’re going to highlight the most important features commonly found in best lineman boots. After, we’ll take an in-depth look at the top five pairs that will not only get you through the work day, but do so with comfort, safety, and a bit of style.

Equipped with so many features, lineman boots are far from being the cheapest occupational footwear. The last thing that you want to do is invest in a pair that saves you a few bucks (though likely not many) while compromising your safety and failing the test of time after a few months of use.

Boot

Design

Comfort &
Protection Rating

Price

TOP PICK

HOFFMAN BOOTS 10" Composite Toe
Dri-Line

$$

Wesco HIghliner 10" Brown

Wesco Highliner 10" Brown

$$$

La Sportiva
Karakorum

$$

Georgia Men's
Loggers G7313

$

Irish Setter 8"

$

What to Look for in Pole Climbing Boots

Sole Traction & Durability

Serving as the layer that makes contact with the variety of surfaces you face, the soles play a particularly important role for linemen. More than likely, you’re tasked with the occasional (or everyday) climb to reach powerlines needing your masterful touch. Having aggressive treading and high-quality traction are two must have features for any linemans boots.

Deep tread lines will ensure that your boots are able to grip limited climbing surfaces while the traction keeps your footing in place if conditions are slick. These both contribute greatly to your safety and grant you the confidence to perform your best on the job.
(Check out our 11 top-rated work boots for any job HERE)

man sole of shoe

Sole durability is another important feature that will make sure your boots stick around for many years and keep your wallet happy. Encountering rough climbing surfaces as well as everyday wear and tear can easily burn through soles lacking durability and cause you to have to invest in a few new pairs every year.

Safety Features

Working around electricity, it’s an inevitable safety risk that all linemen face. Regardless of whether or not your employer requires your footwear to have certain safety features, electrical hazard grade work boots are something you should consider.

Supporting Your Ankles

Secure footing plays an integral role when you’re climbing poles and metal towers. While you don’t want your boots to restrict your motion, tall boots with full lacing and reinforced ankle support will reduce the risk of injury.

Electrical Hazards

Live wires and open circuits will always be dangerous, but proper boots can help to mitigate the risk. By having a pair that passes the electrical hazard certification, you can perform your job more comfortably.
(Full guide to the really comfortable work boots here)

Safety Toe

Having boots with built in safety caps also serve an important role for the climbing lineman. One of the last things you want to have to worry about is the risk of stubbing your toe during an ascent or descent. No one enjoys a stubbed toe, but in this circumstance, it can hinder your climbing ability.

Why is Waterproofing Important

Your job may take you indoors on some days, but the majority of your time is going to be spent outside. Rain is an almost impossible element to avoid as an outdoor worker. As a result, the best lineman boots are prepared to handle wet conditions.

water droplets waterproof outer layer

The first layer of defense starts from the outside, usually with a leather exterior. Additional seam sealing is a great added measure that reinforces the weakest points along the boots. If any water makes it to the inside, having a moisture wicking internal lining will handle the rest and make sure your feet stay dry and comfortable which is an important feature to looks at line boot reviews.


Our 5 Best Lineman Boots

HOFFMAN BOOTS Men's 10" Composite Toe Dri-Line

The first thing you’ll notice about these pole climbing boots is their sleek, stylish appearance. Beautiful waterproof full grain leather is reinforced with triple stitching from the top to bottom, including a side patch that can handle the wear and tear of climbing poles.

Equipped with thick Vibram soles sporting aggressive tread, these boots are capable of gripping any surface and keeping you secure whether you're on the ground or high above the streets. Even more impressive, they come built in with two steel shanks to protect your arches from climbing discomforts while giving you the perfect amount of support.

Lastly, composite safety toes handle the impact protection as well as electrical hazard safety without adding much weight. Though they’re not the cheapest pair of boots on this list, they’re armed to make your job as a lineman easy and enjoyable.

Pros

  • Superior waterproofing (external and internal)
  • Provide warmth in cold weather
    (For a full guide to the best winter work boots click here)
  • Excellent arch and climbing support
  • Full ankle, foot, and toe protection
  • Extra wide options available
  • Composite Toe

Cons

  • External leather needing cleaning quite often

Wesco Highliner 10" Brown Lineman Boots BR9710100

Wesco boots are often referred to in the lineman profession as the best of the best. The tall design and lace-to-toe build are perfect for keeping your feet and ankles secured as well as protected while climbing up rough, unforgiving surfaces.

They meet traction standards with Vibram soles and deep tread lines, but more importantly, it’s the build in steel breastplate heel that really makes them shine. This unique feature ensures that your feet aren’t fatigued and irritated during long climbing days. If that’s not enough, a ribbed steel shank and leather slip also rest between the soles and your feet for additional support.

One final steel plate is built into the sides under an extra flap of leather to add external durability.(most durable work boots here) As you can see, these boots were built for the climbing lineman and live up to the industry standard they’ve set.

Pros

  • Superior comfort and full foot support
  • Surprisingly lightweight
  • Durable leather exterior
  • Great built in climbing support
  • Waterproof features are good

Cons

  • Doesn’t hold up well for climbing steel
  • Not electrical hazard safe
  • Quite Expensive

La Sportiva Karakorum Boot

At first glance, these boots will look like they’re meant for hiking. With a waterproof rubber shell around the base, shallow puddles stand no chance of reaching your dry feet, and anything deeper will quickly roll off thanks to the abrasion and water resistant rugged leather.

The leather is uniquely made to withstand harsh environments while maintaining breathability around the uppers so your feet can ventilate in conjunction with the internal mesh lining. Slipping your feet in, you’ll notice the welcoming flexibility around the heel and ankle that offers just enough support to keep you feeling secure while having the freedom to move as your job requires.

Between the multiple layers of insole and midsole (best work boot midsoles here), your feet will be well taken care of with shock absorption and comfort. While these heavy duty boots weren’t initially designed with linemen in mind, they’ve grown in popularity throughout the profession due to their relevant features, long lasting build, and versatile use.

Pros

  • Great for ground workers and climbers
  • Leather that can last for years
  • Flexible yet supportive
  • Vibram soles with crampon compatibility

Cons

  • No electrical hazard protection
  • Rubber shell prone to separating

Georgia Boot Men's Loggers G7313

These Georgia boots come loaded with a ton of features at one of the most affordable prices on this list. Smooth full grain leather creates the waterproof barrier, lined all the way to the top with stud hooks and steel washer eyelets ensuring secure lacing with long lasting durability.

Not only are the soles thick and deep with tread patterns, but they’re also heat, oil, slip, abrasion, and chemical resistant so they can withstand any conditions your job throws at them. Along the interior, your feet will be cradled by orthopedic inserts that provide both comfort and much-needed arch support for long shifts.

You’re fully protected with an impact and electrical hazard safe steel toe cap with ample wiggle room. For the price and number of features, you’ll be hard pressed to find a better value than these Georgia boots.

Pros

  • Solid traction for confident footing
  • Fast break in period
  • All day comfort
  • Ample toe room with a secure fit

Cons

  • Leather lacks long term durability
  • Sizing can be difficult to get right
  • Waterproofing prone to leaks over time

Irish Setter Men's 83810 8" Steel-Toe

The Irish Setter brand is well known for creating boots of the highest quality, which holds true even as they venture into the category of lineman boots. For some, the defined heel of the slip and oil resistant sole may feel a bit awkward at first, but once you get used to them, you realize that they’re built for climbing and supporting your efforts.

Rugged waterproof leather with seam sealed lining creates an impregnable fortress for your feet no matter how wet the conditions get. At the top, your ankles are sealed and comforted with padded tongues and collars to keep debris out as well.

They’re built with 400g of Thinsulate, ideal for cold weather while the lineman boot with steel shank keeps your feet feeling great before and after a climb. For carrying such a strong name brand and a number of high-end features, they’re the most affordable boots on this list.

Pros

  • Warm and waterproof
  • Secure footing in all kinds of environments
  • Full boot durability
  • Exceptional comfort

Cons

  • Thinsulate can create a tight fit
  • Long break in period
  • Boots sizes prone to running narrow


And the winner is... 

After careful consideration and reviewing some of the highest-quality boots, we’ve decided that the Hoffman Men's 10" Composite Toe Dri-Line are the best lineman boots for tackling the demanding work you face in the field.

They’re waterproof, impact and electrical hazard safe, have deep, durable tread with added features for climbing, and offer great full foot support. No matter how long the shift or how high the climb, this Hoffman footwear will have you fully equipped and serve you for a long time to come.

Best Mechanic Work Boots – Great Traction and Durability

Mechanics have tough jobs and they need security around the feet. As a mechanic, you endure arduous hours in the workshop and you are subjected to many hazards that could cause some serious harm to yourself if you're not carful.

The best mechanic boots are designed to keep you safe and help you avoid any of these potentially hazardous situations but at the same time keep you comfortable.

We have set out on our journey to find the top work footwear for mechanics and explore how these boots could potentially keep you safe and provide you will all of the features needed to complete your job.

We also included a well-researched buyer’s guide with all of the main features you should look for when selecting a pair of these boots and shoes.

Boot/shoe

Design

Comfort &
Protection Rating

Price

TOP PICK

Timberland Pro 40008 Mudsill Steel Toe

Best Overall Rating

$

KEEN Utility Men's Braddock Mid AL WP

$$

Wolverine Men's W04820 Buccaneer

$$

Wolverine Men's Steel Toe Raider

$$

Caterpillar Diagnostic Waterproof Steel-Toe

$$

Carhartt Durable 6" Comp Toe

$$

Sketchers Surren Waterproof Steel Toe

$

Key features to look for in auto mechanic work boots:

While any boots might seem like they will do the trick, that certainly is not the case and this specially designed footwear will offer you some additional protection in the workshop. These boots are often a little more durable and they mainly focus on keeping you safe from things like oil and oily surfaces.
(For an article on the best 11 work boots picked by us click here)

They have multifunctional features included as well and this will offer you some additional versatility. Here are the most important features you should consider looking for:

Outer sole/ Traction

The outer sole is directly related to the amount of traction offered. As a mechanic, you will find yourself working on oily greasy surfaces and while carrying those heavy engine parts, tools and tyres, it can be quite a safety hazard if the boots aren’t fully slipping resistant. This where non slip mechanic shoes are important.

 Engine oil spilling

Large rubber lug soles are the most common choice and they tend to offer the most traction. While synthetic might be cheaper, it also lacks some durability and we do not like the white soles as they tend to turn black quite fast.

Vibram soles are also quite durable and they do not wear away as quickly. The Vibram soles are a little pricey, but when it comes to working in an arduous environment, they could save you from serious injury.

Upper materials durability

As a mechanic, you will be placing a lot of strain on the upper part of the boots. They will have to endure oil and water while having to face falling objects too. The upper material should be made from premium leather as this is the most durable, but rubber also works from time to time.
The leather is the more expensive option, but when treated correctly, it will last you longer.

Car mechanic changing brake pads

Leather is naturally water resistant, while rubber is fully waterproof, but once the leather has been tanned or treated, it will also become fully waterproof. This is generally done by manufacturers but can be done at home as well.

Shoes vs Boots - Which do you prefer?

There's pros and cons for both. While shoes are lighter due to there overall size and shape they predominately offer less protection. Boots being heavier have better stronger safety toes and much more likely to last a longer time. Boots also usually are made of thicker more durable materials as well.
There's a large variety of both types of footwear and in the reviews below we've added what we think are the best choices to get you through your day with comfort and but overall protection. In our research we even found that some people like like to wear tennis shoes for mechanics or order snap on mechanic shoes.  

Cushioned insole

Your feet will be twisting and you will find yourself working in precarious situations as a mechanic. This means that you will need a flexible, yet comfortable boot or shoe to walk on. The inner sole should be cushioned enough to mold to the shape of your feet.
(Check out the most comfortable insoles for work footwear here)

The most affordable option is an EVA footbed, but memory foam stands out as the best choice. PU cushioning is cheap, but not as effective as the other two options.

Waterproof

While water might not be one of your biggest concerns, it remains something you need protection from. You will need to ensure the boot is fully waterproof to keep your feet dry and to stop the oil, grease or coolant from getting inside.

While rubber is generally the best option to keep you dry, tanned leather can definitely keep the water out as well. If your boots have not been tanned, you could find a few ways to waterproof the boots yourself by adding a coating. (How to Waterproof Boots Guide HERE)

Safety Toe

In the workshop, you will be working with heavy parts of cars, trucks or tools and should these fall, they could potentially cause serious injury. In the best mechanics work boots, it is essential for you to have the right safety toe and while steel seems more durable, the composite toe is much lighter.
(Check out our full guide to the best light weight work boots here)
The alloy toe is light and extremely durable, but it is also the most expensive option and will spike the overall costs of your footwear.


The Best Mechanic boots and Shoes Available

Now that you have a better understanding of the features to look for in auto mechanic work boots, you might not know which footwear brands and collections to look at.

We have done all the legwork and selected the top 7 that has been tested and proven themselves to be worthy mechanic boots. This list will certainly be a great place to start looking for that perfect pair of mechanic shoes or boots.

Timberland PRO Men's 40008 Mudsill Low Steel-Toe Lace-Up Shoe

The Timberland PRO Men’s Mudsill Low Steel-Toe shoes are one of the more comfortable options of the list. It is designed from premium leather to give you that much-needed durability as a mechanic and the rubber outer sole will ensure maximum traction on oily surfaces.

These men's mechanic shoes also features a low-cut design and this offers you some additional flexibility, while the shock diffusion helps absorb some of the strain placed on the shoe from long working hours. A steel- toe has been incorporated for your protection and this meets the safety standards required by most top companies.

EVA is used for the midsole, which comfortably molds to the shape of your feet. This can be helpful for pronation and supination, but as a mechanic, it will ensure comfort when crouching down under the car. The boots are also quite affordable and we would definitely recommend them for the value and the features.

Pros

  • Flexible low-cut design
  • Includes shock diffusion
  • Moldable EVA midsole
  • Really affordable price

Cons

  • The lacing hooks tend to wear after time
  • Lacks ankle support

KEEN Utility Men's Braddock Mid AL WP Work Boot

The KEEN Utility Men’s Braddock selection is designed for the hard working individual and these work boots are made from a combination of leather and synthetic materials.

A dry waterproof membrane is included in the lining, which offers you additional protection from oil and water getting inside.We really loved the large patterned outer sole lug. These offer maximum traction and will ensure you stay supported on oil and water-riddles surfaces. A thermoplastic polyurethane shank is included for maximum support and it also keeps the weight down when compared to most other steel shanks.

The steel toes are asymmetrical, which means each boot will fit comfortably. This does add some weight to the boot, but having protection from those falling engine parts is something you need to keep in mind. Finally, the price is not as expensive as one would generally expect KEEN to be. You will also have the additional electric hazard resistant feature for those arduous electrical situations.

Pros

  • Comfortable and waterproof inner lining
  • Lightweight shank for support
  • Electric resistant
  • Reasonably priced

Cons

  • Quite heavy design 
  • Mid-cut design lacks flexibility

Wolverine Men's W04820 Buccaneer 

The Wolverine Men’s W04820 Buccaneer work boot is an affordable and stylish option for the serious mechanic. Not only does it include a steel toe, which has been ASTM rated, but the patented Multishox technology will keep the strain off your feet and help you get through the day without any blisters or sore feet.

The boot is constructed from premium leather and it features a large lugged rubber outer sole. This has been tested on water and oil-riddled surfaces with great effectiveness and should keep you safe. The waterproof feature is really important, and this pair includes a mesh lining that will not only keep your feet dry but also reduce any chances of possible abrasions occurring.

Unfortunately, PU cushioning is used for the midsole, but this is also removable and you could replace it with any inner sole of your choice. We would definitely recommend these boots for the price. They are also lightweight with the addition of nylon shank to give you some support.

Pros

  • Extremely durable and rugged
  • Slip resistant
  • Lightweight

Cons

  • PU cushioned midsole
  • Long break in period required

Wolverine Men's Steel Toe Raider

Next, we have the Wolverine Raider boot and it is made from the same top quality premium leather as the previous option. The upper leather has also been tanned and the addition of a mesh lining will make these shoes breathable and fully waterproof. The Wolverine multishox countered welt construction offers you some additional support while taking the strain off your feet.

Additionally, this pair also includes a steel toe, but this is quite uncomfortable at first and you will need to break them in. The PU cushioning also lacks somewhat when compared to other boots, however, it can also be removed and replaced with EVA if you feel that it is not comfortable enough.

Instead of a steel shank, Wolverine has also added the nylon shank to this pair, which offers you great support while keeping the weight to a minimum.This is one of the most affordable options and we would highly recommend all of these features to anyone working as a mechanic. The boot is quite flexible as well and it has been approved to be ASTM safe.

Pros

  • Includes multishox technology
  • Removable inner sole
  • Lightweight nylon shank
  • Reasonably priced

Cons

  • Long break in period
  • Lacks some sole support

Caterpillar Men's Diagnostic Waterproof Steel-Toe

The Caterpillar Men's Diagnostic Waterproof Steel-Toe Work Boot is a really cheap option for those just starting out. It is made from a quality leather upper and the large rubber outer sole offers decent traction in virtually any environment.

What sets it apart from the rest is the inner lining and this is made from 200g Thinsulate. This lining is used to ensure decent heat retention on those cold days and will also keep out any possible water or oil spills from getting inside. One of our favorite parts is the EVA foam insert, which includes gel technology. This makes it one of the most comfortable options on the market today.
(To see our top picks for great quality affordable work boots click here)

This boot is one of the cheapest options and while it might lack some durability and longevity, it still includes a well-designed steel toe for your safety and we would definitely recommend it to anyone looking to start out in the mechanic industry.

Pros

  • Stylish design
  • EVA foam insert with Gel
  • Fairly priced
  • Thinsulate inner lining

Cons

  • Lacks durability in the outer sole
  • Minimal ventilation
  • Oversized design

Carhartt Men's Durable Comfort 6" Brown Waterproof Comp Toe CME6355 Boot

As an industrially recommended boot, the Carhartt Men’s Durable Comfort 6” boot is a great option for the avid mechanic. It is made from premium quality tanned leather and includes a larger lug rubber outer sole to provide you with maximum traction on every surface.

The foot bed is actually tested numerous times with multiple foot scans and this provides unrivaled comfort and it also molds to the shape of your feet. A waterproof membrane is included in the lining, but this is also extremely breathable and will offer some much-needed ventilation in the hot workshop or car garage.

Finally, the boot is electrical hazard resistant, which offers you additional versatility in the work place. We would definitely recommend it as a multi purpose boot for all your job requirements. It is also really affordable for all of these features and ASTM approved for the safety toe.

Pros

  • Lightweight comp toe
  • Waterproof membrane
  • ASTM approved
  • Electric resistant

Cons

  • The boot is quite heavy

Skechers for Work Men's Surren Waterproof Steel Toe

Last but certainly not least, we have the Skechers for Work Men's Surren Waterproof Steel Toe Work Boot. This boot is made from a combination of synthetic and leather materials. It is also one of the most flexible options on the market and the relaxed fit certainly takes the strain off your feet when crouching down.

The boot includes a synthetic sole and while this might not be as hard as the rubber, it is perfect for absorbing shock. The outer sole does lack some durability but will be ideal for beginners. The best part of the boot is the inner sole and memory foam has been used. It is also rated as the number one option for those suffering from problems with their feet.

This boot is quite expensive and we would recommend it to those suffering from pronation and supination. The addition of a steel toe will keep you safe and the inner lining offers decent ventilation and keeps you dry.
(For a detailed guide to composite toe and steel toe boots click here)

Pros

  • Stylish design
  • Extremely flexible
  • Memory foam inner sole
  • Offers great ventilation

Cons

  • Lacks some support
  • Expensive

And the winner is... 

Mechanics have tough jobs and your feet might constantly feel like they are taking massive punishment. We hope that these boots might help you get rid of those strenuous evenings after work.

Choosing the best one is not as easy as you might think and we have selected the Timberland PRO Men's 40008 Mudsill Low Steel-Toe boot. It is an affordable option liked by many mechanics and offers some of the greatest safety you could ask for.

We would like to thank you for reading this article and we would like to encourage you to let us know in the comment section if we have chosen the best mechanic boots you generally use and if you have used any of these boots for your work.

6 Best Roofing Boots and Shoes – Great Traction

Roofers don’t get enough credit for the hard, dangerous work they do on a regular basis. On top of being a career not meant for the faint of heart, you have to perform labor intensive work above the ground, exposed to the elements, and at awkward angles that test your balancing skills.

As such, finding the best roofing boots is a top priority from a safety and comfort standpoint. Not only do you need to make sure you’re secure and confident in your footing (because it’s a long way down), but you also need to be comfortable enough to endure long hours.

Your time-consuming search has come to an end. We’ve compiled all of the information you could possibly need to pick out your perfect footwear. Once we go over the important features that you should look for, we’re going to review the best roofer boots and roofing shoes.

Boot

Design

Comfort &
Protection Rating

Price

Thorogood Men’s American Heritage Roofer footwear

Top Pick!

Thorogood Men’s
American Heritage 

$$

Cougar Paw Perform Roof footwear

Cougar Paw
Perform Roof

$$

Timberland PRO Barstow Wedge

Timberland PRO
Barstow Wedge

$$

Shoe

Design

Comfort &
Protection Rating

Price

Arc'teryx Men's Acrux FL GTX Approach Shoes

Arc'teryx Men's
Acrux FL GTX
Approach Shoes

$$$

KEEN Men's Targhee II Hiking Shoe

KEEN Men's
Targhee II
Hiking Shoe

$$

Merrell Men’s Moab Ventilator Hiking Shoe

Merrell Men’s
Moab Ventilator
Hiking Shoe

$


Features to Look for Above All Else

Traction & Slip Resistance

This one is pretty much a no brainer. If you’re going to be facing dangerous climbs on the daily, you’re going to need shoes that can really grip especially for traction on metal roofs. Between the different elements you’ll be exposed to and the hazards created during the job, slipping is a real concern for roofers.

Having high-quality slip resistance is a must have. Without having to worry about slick surfaces and tumbling toward the edge, you can perform your work confidently. To take it a step further, oil resistance is always a plus that you can look out for as well.

Man work on step roof top

Once you have the slip resistance under control, you’re also going to want to make sure the traction is able to grip the variety of roofing surfaces you’ll be encountering. Vibram soles are often the best choice to look for. They’re well-known for both their superior traction and durability.

Why is Traction on Metal Roofs Important

Metal is one of the slipperiest materials you can work on and this especially applies when the metal is wet.
Why does metal become so slippery when you add water? For starter metal roofs can have some sort of coating such as paint or some types of chemicals that helps water run off and stops water from gathering on the roof and freezing. 
When you add water to these surface it makes the surface ver slippery and you are if you are going to be working on surfaces link this make sure you get boots or shoes that are going to give you the right grip. An example of footwear to look out for would be non slip shoes for metal roofing. 

Support & Comfort

As a roofer, you’re going to constantly be challenged with awkward angles and less than ideal working conditions. Naturally, your feet are going to be taking the brunt of the discomfort and suffer from potential problems if your boots don’t offer enough support and comfort.

Arch support is another one of the top features that you should be looking for in your shoes. Constant climbs can really tire out the arches of your feet and cause fatigue to set in. Ample support will help to return energy and keep your feet going all shift long.

Man works on roof with tiles

Comfort is something that anyone wants in their construction footwear, but it’s especially important for roofers. You’ll want to be looking out for comfort features that are designed to help keep the feet anatomically correct while you’re working. The last thing that you want to worry about when you’re installing a new roof under the sweltering sun is miserable feet.

Some Good Brands to Look out for

  • check
    Thorogood roofing boots
  • check
    Cougar paws steel walker boots
  • check
    Red wings

Durability

Of course, what good is it going to do if you invest in a pair of work shoes that hit all of the above points, but lack in durability? Roofing is a rugged job that’s going to put some serious wear and tear on your boots.
(For a list of our top recommended durable boots click here)

Starting with the bottom (the most important), you want thick, durable soles that can withstand constant ladder climbs, scuffs against rough shingles, and the intense heat during summer months that can literally melt boots. Even if the rest of the shoe lacks durability, the soles are what’s going to make the biggest difference on the job.

Secondly, any pair built with rugged full grain leather is a plus. Leather is designed to handle brutal working conditions and offer your feet much needed support during steep climbs. Depending on the amount of time you’ll actually be spending on roofs, nylon mesh is a great material for breathability, though it lacks the durability of leather.

Footwear Ventilation and Moisture Control

Being up on a roof directly under the sun with no protective shade can get pretty toasty. Not only will you feel it beating down on your body, but the roof and materials you’re working with will also get scorching hot.

Water droplets

If you’re prone to getting sweaty feet, ventilation is going to be a top tier feature for you. Nothing can ruin your day faster than soggy socks and moist feet (especially if the shift just started). Finding boots with breathable mesh lining and build in moisture control features can make a world of difference.

Even if your feet don’t easily sweat, the extreme heat from the tiles, metal, slate or shingle surfaces you’re working on can also transfer through the soles of your shoes. If the soles aren’t that thick, it’s easy for the high temperatures to feed into your footwear and start to cook your feet.


Reviews of the Best Roofing Boots

Timberland PRO Barstow Wedge Work Boot

Timberland PRO Barstow Wedge

For starters, these boots look like they’re built for roofing. Beautifully colored rugged full grain leather gives the body a striking appearance while offering excellent durability. Your attention will be immediately drawn to the thick white rubber soles which provide slip, oil, abrasion, heat resistance, and electrical hazard protection.

The exterior is completed with a long lasting Goodyear welt and triple stitching along the seams that experience the most wear and tear. Along the inside, your feet will be comforted and kept dry with mesh lining as well as multiple layers of comfort.

You get the much needed shock absorption and arch support with these Timberlands, allowing you to focus on the work at hand without fatigued feet. For the price and number of features they come packed with, they’re easily one of the best work boots for roofing.

Pros

  • Little to no break in period
  • Great support for those with plantar fasciitis
  • Excellent moisture control
  • Amazing value

Cons

  • Prone to rubbing around the heel area
  • Toe section lacks long term durability
  • A little too roomy

Cougar Paw Perform Roof Boot

Cougar Paw Perform Roof footwear

These heavy duty work boots were built specifically for the hard working roofer. The thick outsoles do more than just grip any surface you come in contact with, they also provide you with multiple layers of comfort and protection features that do a great job absorbing extreme heat and giving support.

Another unique feature about these Cougar Paws is the specially designed removable traction pad that fits securely onto the bottoms of the soles. This ensures that you’re able to climb even the steepest roofs with ease and confidence.

Inside of the flexible leather exterior, your feet will be cradled by thick cushioning that offers as much support as it does comfort. Build in anti-fatigue technology combats even the longest work shifts so your feet are happy at the end of the day.

Pros

  • Specially made for roof workers
  • Great foot support with anti-fatigue
  • Comfortable for 10+ hours
  • High-grade slip resistance
  • Good breathability

Cons

  • Leather scuffs easily
  • Tongue can cause some pressure
  • Traction pads need replacing often
  • Heavy build

Thorogood Men’s American Heritage Lace-To-Toe Roofing Boots

Thorogood Men’s American Heritage footwear

The Thorogood brand is well-known for their high-quality work boots that can handle just about any job, roofing included. Thick white Vibram soles offer exceptional grip that will keep you in place no matter the angle you’re climbing at.
(How to lace work boots the correct way Here)

Supple yet durable thick leather encases the exterior with reinforcing along the sides which usually take the heaviest beating. You’ll notice triple stitching along the seams and even rivets which can deflect damaging blows from making contact with the leather.

A full lace-to-toe design ensures that your feet will be firmly secured in the boots while the low cut increases breathability. Comfort features and a fiberglass shank have you covered along the inside and through the midsole to finish these top of the line boots off.

We chose this boot as the best choice. Want to see why? Watch this short video

Pros

  • Full foot comfort and support
  • Secure lacing design
  • Durable construction
  • Superior grip on all roofing surfaces

Cons

  • Prone to running a little narrow
  • Snug fit can cause blisters
  • Sizing can be difficult

Reviews of the Best Roofing Shoes

Arc'teryx Men's Acrux FL GTX Approach Shoes

Arc'teryx Men's Acrux FL GTX Approach Shoes

Yes, these are hiking shoes, but don’t let them fool you. For the contractor that only spends some time on the roof, hiking shoes offer a great, affordable alternative to their heavier boot cousins. If you’re prone to getting sweaty feet, you may also want to consider shoes over boots.

They offer an amazingly lightweight fit and come complete with a leather and nylon mesh construction. This offers the perfect combination of durability and breathability. Along the bottom, they’re built with Vibram soles bringing high-grade grip and flexibility that doesn’t restrict your natural movements.

The low profile design is completely waterproof and you can even wear them off the clock if you want thanks to their stylish design. They carry a fairly high price tag for a pair of shoes, but their versatility and roofing capability makes them well worth it.
(Reviews of top waterproof boots here)

Pros

  • Lightweight design
  • Excellent full foot ventilation
  • Flexible yet supportive
  • Fully waterproof

Cons

  • The thin soles allow heat penetration
  • Lacks long term durability
  • No ankle protection

KEEN Men's Targhee II Hiking Shoe

KEEN Men's Targhee II Hiking Shoe

They’re not going to be the most visually appealing shoes, but these KEEN’s come loaded with tons of high-quality features making them some of the best roofing shoes. They’re constructed with a combination of durable leather and breathable textile that can resist scuffing while on the job. This also makes them good roofing shoes for metal roofs. 

The rubber lugged sole has aggressive treading for superior grip and are even built to be non-marking, perfect for keeping the roof in pristine condition. With full waterproof protection, they have a slightly higher build than the average shoe to provide extra support and protection.

Inside, it’s the metatomical footbed that gives your feet support where they need it the most, even at awkward angles. For a pair of KEEN’s, these shoes sport a very affordable price tag and are an attractive option for the ground and roof worker.
(Check out the cheapest quality footwear here)

Pros

  • Durable sole with great traction
  • Support on uneven surfaces
  • Secure fit with heel lock strap
  • Roomy reinforced toe area
  • Mark resistance

Cons

  • Stock laces can split and break
  • Heavier build
  • Shoes absorb bad odors easily

Merrell Men’s Moab Ventilator Hiking Shoe

Merrell Men’s Moab Ventilator Hiking Shoe

Merrell really mastered it with these hiking shoes that happen to be a great alternative option for the roofing worker looking for something other than boots. The fact that they come equipped with durable Vibram soles lined with deep, aggressive tread is a good start.

Rugged leather and a waterproof mesh upper are completed with a cushioned foam tongue that helps to keep debris out. Rubber toe caps and heel bumpers give these shoes greatly increased durability where they need it most.

Inside, a molded footbed with additional heel and arch support, along with a built in shank, makes these some of the most comfortable shoes you’ll want to have on your feet while you’re scaling roofs. If you’re in the market for shoes instead of boots, we highly recommend these.

Pros

  • Keep your feet cool all day
  • Comfort padding provides ankle support
  • Durability in harsh environments
  • No break in period

Cons

  • Insoles prone to wearing out
  • Outsole can scuff easily
  • Not the most breathable

Here’s Our Chosen Winner...

After carefully working through the dozens of pairs of designs that roofers have to choose from, we were able to narrow it down to these six. Though it was a close contest, we’ve selected the Thorogood Men's American Heritage Lace-To-Toe Roofing Boots as the best roofing boots.

Starting with the durable, thick Vibram soles, they’re sure to keep you secure on any roof you tackle in your line of work. They’re built with thick full grain leather that comes with reinforced stitching, and the full foot comfort and support features are of the highest-quality.

While working on roofs, you can’t go wrong with these boots. Whatever your job has to throw at them, they will take it all head on with flying colors and send you home with happy feet.

5 Best Electrician Work Boots – Comfort and Protection

As an electrician you are constantly on your feet working long days with volatile wires and electrical hazards close by.

This is definitely something of concern if you are not equipped with the right protective clothing and your footwear is one of the best places to start.

The best electrician boots are designed for comfort and to give you that much needed versatility for working up and down ladders and in and out of tight spaces.

We have decided to look a little closer at the top boots, footwear and shoes and select the top 5 to help you perform your job comfortably and keep you safe.

We have also looked at the most important features you need to be aware off when making your purchase as this will give you a better idea of how to get the best possible value for your money.

Boot

Design

Comfort &
Protection Rating

Price

TOP PICK

Keen Utility Men's Davenport

Best Overall Rating

$$

wolverine mens Tarmac boot

Wolverine Men's Tarmac

$$

Timberland PRO Men's Boondock
Waterproof

$$$

Carhartt Men's 6" Inch Composite Toe

$

Thorogood Men's GEN-FLEX 6 Inch Lace-Toe Composite

$$

Key Features to consider when looking for the best electrician work boots:

The features are the things that essentially set the footwear apart and with the right features, you will not have to worry about getting hurt on the job. We have done all the legwork to find these features and we also used them in the process of judging all the selected boots to ensure that the boots are perfect for you to complete your job to the best of your abilities.

The Standard of Electrical Hazard Boots You Need to Look For:

The outer sole is a fundamental part of the best electrician work boots and it not only ensures grip, but it is also made from a certain type of material. Rubber is one of the top materials when it comes to resisting any potential electrical damage.

Construction sign waring of electrical hazards

If the rest of your kit is made from electrically insulating materials, you should also ensure the boots are made from these materials. It is also important that you follow the correct electrical standards to ensure that your boots are safe enough for the current you work with.

Electrical Safety Boots and the Toe Cap:

The safety toe is necessary and offers protection in any environment, but when it comes to work boots for electricians, the steel toe is not the right option. Steel does conduct electricity and the composite toe will be a good alternative.

We understand it might be a little more expensive, but having comfort and a lightweight safety toe for protection will be the best possible choice you could make.

Why is Waterproofing important?

It is no secret that water is conductive of electricity and should definitely not mix on the job site, but if there is water around, which will inevitably happen, you should have the good footwear for protection. While electricity on its own could lead to permanent nerve and tissue damage; if water is present, this can be ten times worse.

Water on light bulb

The boot should be waterproof and it should dry out quickly. Leather seems like the obvious choice when it comes to durability, but the rubber can often times dry out much faster and still offer you decent protection from electrical hazards.
(For a detailed guide to the best waterproof work boots click here)

Maximum Comfort:

Lastly, you should consider adding or ensuring comfort and this is where the upper materials and the inner lining play a huge roll. Leather is stiff, but once tanned, it can be quite flexible, while rubber is already flexible and synthetic is affordable, but lack durability.
The inner lining should dry out quickly and provide some decent ventilation. Thinsulate will not be the best option here.

For the inner sole, we recommend sticking to EVA as it is reasonably priced and provides some additional comfort where the PU cushioning might fall short. Memory foam is the best for people suffering from foot condition and it will mold to the shape of your feet with ease.


Top 5 boots for electricians:

Now that you have a better understanding of the most important features, you might wonder what the best electrical work boots are. This is once again where we have taken the initiative to help you find the right footwear to get you started. Here are the top 5 boots we would recommend for electricians:

Keen Utility Men's Davenport Shoe

The KEEN Utility Men’s Davenport shoe is designed to give you versatility. It is constructed from a leather and textile upper, with a rubber sole that is electrical hazard resistant. As an electrician, it also offers you dry waterproof membrane that will offer you decent ventilation, whilst keeping the boot dry and the water from getting inside.

Two asymmetrical composite toes will offer some added protection from the tough environment while ensuring that you have comfort as well when wearing them. Cleansport NXT has been used to remove any potential odors, which also means that the boot will be clean and smell great when used for prolonged periods.

The price makes is ideal for the average electrician and the style will make it ideal for all your working needs. We like the mid-cut design as it offers some additional ankle support and it also offers some additional security when entering in those electrical hazardous areas. We would highly recommend them to construction workers and electricians.

Pros

  • Stylish and durable design
  • Lightweight, so your feet won't fatigue quickly
  • Odor resistant and waterproof
  • Offers ankle protection
  • Composite toe gives you strong protection

Cons

  • Longer break in period

Wolverine Men's Tarmac Work Boot

The Wolverine Men's Tarmac Work boot also features a non-metallic design that should be perfect for any electrician working in those electrically volatile environments. The boot is constructed from leather on the upper and rubber is the material used in the outer sole. The rubber is a little thicker and while they are slip resistant, it offers great protection from the floor.

Moisture managing mesh linings are incorporated to keep your feet dry and the removable insole can be replaced with whichever one you need to use in your job. The nylon shank and composite toe will offer you some additional support and protection while keeping the weight down to a minimum and reducing the fatigue.
(For a full guide to top rated work boot insoles click here)

Even with the Multishox and Durashox technology, it remains one of the more affordable options for any electrician to buy. It is not as stylish, but all of the features work together perfectly to give you a great boot.

Pros

  • Extremely durable
  • Multishox and Durashox will reduce the effect of fatigue
  • Lightweight (Check out our reviews of top rated light weight boots here)
  • Reasonably priced

Cons

  • A little oversized

Timberland PRO Men's Boondock 6" Waterproof Non-Insulated

The Timberland PRO Men's Boondock 6" Waterproof Non-Insulated Work Boot is designed from leather and synthetic materials. It features a unique design and it is not insulated. This means that you will have great ventilation coming through when moving through houses in the heat of the day.

With a synthetic sole, it can be used in virtually any environment. No metallic parts are found near the sole, but the eyelets in the laces are made from metal. A waterproof membrane is included, it also dries out much faster to ensure that electricity and water do not need to get in contact with one another when on the job.

This pair is really affordable and the design does look stylish and perfect for any wardrobe. The anti-fatigue technology is ideal for those spending most of the day on their feet, but we would have liked to see some sort of safety toe included.
(For a full guide to quality but affordable work boots click here)

Pros

  • Durable and comfortable
  • Provides decent ventilation
  • Includes anti-fatigue technology

Cons

  • No safety toe
  • Rubber toe lacks some durability

Carhartt Men's CMF6366 6 Inch Composite Toe

Carhartt boots are quite rugged in and the Men’s CMF6366 6-inch Comp toe is the ideal boot to used in your electrical job. It is constructed from premium leather and includes a shock absorbing rubber outer sole. The composite toe adds some protection and keeps the weight down, while also keeping this pair from having problems in electrical situations.

On the inside, you will be treated to an EVA midsole that includes the Ortholite technology. This adds to the already lightweight feature and ensures maximum comfort. The boot is ideal for construction as well as electrical environments and the durability will give you a long lifetime with them.

These boots are some of the cheaper boots when looking at all of the features they include. They have everything you need if you work in construction and can be seen as a versatile boot for almost any potential job. The only downside is the steel shank that adds some additional weight and could be bad for strong electrical currents.

Pros

  • Extremely durable and versatile
  • Lightweight
  • EVA midsole adds comfort
  • Really affordable

Cons

  • Steel shank makes the boot heavier than other deigns 

Thorogood Men's GEN-FLEX 6-Inch Lace-Toe Composite Work Boot

Last but certainly not least, we have the Thorogood Men’s Gen-Flex 6-inch Composite toe boot. The boot is constructed from premium leather for the upper and does not contain any metallic parts in the laces. The outer sole is made from new Gen-flex dual density rubber, which should help absorb shock and reduce fatigue as well.

A composite toe and composite shank have been used in the design and this reduces the weight significantly. The boot also features an oversized design, providing some additional space and comfort for those with larger feet. A molded EVA midsole is included, making these boots perfect for those suffering from foot problems such as pronation and supination.

This pair is also quite affordable and we would recommend them to anyone working in construction or near potential electrical hazards.

Pros

  • Non-metallic design
  • Includes a molded EVA midsole
  • Lightweight 
  • Reasonably priced

Cons

  • Lacks ventilation

And the winner is... 

As an electrician, you take safety to the next level and with these boots; you will be able to do exactly that. Choosing the best one is not easy and we have decided to choose the Keen Utility Men's Davenport Shoe. It offers great durability and comfort and the non-metallic design makes it perfect for electrical hazards.

We would like to thank you for reading this article and we hope that you have found the ideal boots to match your needs. We would like to thank you for reading our best electrician boots edition and we would like to encourage you to let us know in the comment section if we have missed any of your favourites.

Best Lightweight Work Boots | Reduce Foot Fatigue

The weight of your boots is something we often times take for granted and many people think that the weight also goes hand in hand with the durability.

This couldn't be any further from the truth and best lightweight work boots are designed from exceptional lightweight materials to ensure that you not only have comfort but excellent durability as well.

We have looked at many different work boots and chosen a few that we believe will be ideal for prolonged working hours. Our buyer’s guide also includes some of the most important features you need to be aware of to ensure that when you are buying these boots, you are getting the best possible value for your money.

Key Features to consider when purchasing lightweight footwear for work:

Whether you are choosing normal lightweight work boots or lightweight steel toe boots, it is always beneficial if you know which features are the most important to look at. We have broken down a few of the main features that you should look at. You certainly need not include all of them and your job title will determine which ones are the most important. However, this should be used as your general guideline:

The Type of Support:

When talking about the support, the shank comes to mind immediately, but when you are looking to save some weight, you might not need a steel shank. Carbon and nylon are also used in shanks and while the carbon is a little more expensive, it greatly reduces the weight when compared to steel. Nylon can also be a good option, but it does not offer as much support as carbon fiber.

Upper Materials:

The materials used for the construction of the upper goes hand in hand with durability and weight. While lighter textile fabrics or fibers are perfect for reducing the weight, it could also reduce the durability. Leather is the main material you should focus on and it offers a great combination of weight and durability. If you are looking to reduce the price a little bit, we would also recommend synthetic materials, but they might lack some durability as well.

Type of Design:

You'll need to choose between a high-cut, mid-cut, or low-cut design. These all offer their own unique benefits. A high-cut shoe offers additional ankle support but might weigh more. On the other hand, the low-cut is lightweight and lacks support. Mid-cut work boots will offer you the best of both worlds.

Many people will tell you that your boots don't need to look good, it only needs to be sturdy and practical, but we would disagree with that statement. Having a design you like makes you feel good and this overflows into your work, and you'll most likely take better care of them to keep up their appearance. 

Safety:

When working jobs like construction, the safety factor does come into play. By having a steel toe, you eliminate the risk of serious injury on your feet. The steel toe does add some weight to the footwear, but safety is generally considered more important than weight. If you do not work in hazardous environments, you might not require lightweight safety toe boots and this is replaceable with a good liner.

Outer sole:

No matter which line of work you are in, the outer sole does matter. The outer sole is generally comprised of a lug. This could be synthetic or rubber, but you will be looking for the ability to keep yours from slipping. A slip resistant outer sole can be defined by the patterns of the lugs and the size. Larger lugs with bigger gaps often times give more traction, whilst the smaller lugs are designed for walking on dry surfaces.

Liner:

The inner liner is something you really rely on a lot. This part is found on the inside of the boot it will wick away moisture as well as keep water from seeping in and getting your feet wet. Gore-Tex is generally the most multifunctional liners you could have, but Thinsulate will be ideal for colder conditions. The inner liner should be looked at if you plan on spending prolonged hours in the shoes and they often times include odorless antimicrobial properties to keep your footwear smelling clean.

Inner sole:

The inner sole and the lining combine when it comes to comfort. There are multiple different inner soles for you to choose from, but memory foam and EVA foam still stand superior. Not only are the lightweight materials, but they offer great comfort and molds to the shape of your feet. PU cushioning is also great but lacks the ability to maintain it s form and might lead to a longer break in period. If you find yourself suffering from pronation and supination, the memory foam inner sole will be a great option.

Waterproof:

The waterproofing feature is something that comes handy when you think you do not need it. Having it could save you additional hassles and allow you to roam anywhere. Lightweight waterproof work boots are generally expensive, but they offer multifunctional use. This makes them a great option for serious outdoor workers and they are usable indoors on oil-riddled surfaces for their traction abilities.

Why you should consider lightweight steel toe Work boots:

Safety is one of the main concerns many people have when working jobs like construction and having a steel toe just adds to the overall safety. If you find yourself working in these tough environments with the risk of falling objects, steel toe boots offer that added peace of mind. They also protected from abrasions on the front of the feet and ensure maximum comfort all round.

Jobs that could require specialised lightweight footwear:


Top 7 best lightweight work boots made:

Now that you know the main features, you might be ready to assume you are an expert in choosing these shoes. While these features will help you when looking for them on your own, we have simplified the process and selected seven of the top mens lightweight work boots that you could find on the market today. This selection of footwear all match most parts of our buyer’s guide and should provide you with great value for your money.

KEEN Utility Men's Atlanta Cool Steel Toe Work Shoe

Mens lightweight steel toe boots are generally expensive and KEEN is not the cheapest brand on the market, but the Utility Men’s Atlanta Cool Steel toe work shoe is one of the most affordable you could find. It features a leather and mesh construction with most of the emphasis placed on the premium leather that for added durability.

The steel toes are not only inserted but have been asymmetrically designed. This means that both should fit perfectly to the shape of your feet. These also offer some additional protection for construction workers and the dual density EVA midsole adds superior comfort and cushioning to the inside.

Mesh is a used for the liner, which promotes breathability and ventilation. If you struggle with sweat and water, this will help evaporate and wick away most of the moisture. Unfortunately, this does mean the shoe is not waterproof.

The shoe is one of the cheapest you will find from KEEN and it still includes all of the top features and technology. We would definitely recommend them for construction and factory work.

Check out the features of our top pick in this video

Pros

  • Breathable mesh lining
  • Water and oil resistant outer sole
  • Dual density EVA midsole
  • Really affordable price

Cons

  • These shoes are not waterproof

Timberland PRO Men's 40008 Mudsill Low Steel-Toe Lace-Up

The Timberland Pro Men's Mudsill Low Steel-Toe Lace up boot is the first on our list. It has been designed from premium leather, and it features a stylish black design. The low-cut construction offers you additional flexibility but does lack some ankle support.

A mesh lining with antimicrobial properties has been included on the inside. This lining wicks away moisture caused by sweat, while the antimicrobial properties will reduce the chances of having any foul odors after prolong working hours. EVA has been used for the midsole that lies snug between the inner and outer sole. If pronation or supination is one of your problems, this midsole will be ideal.

They do include a durable steel toe and they are 100% waterproof as well. The addition of a nylon shank will offer you some added support without the extra weight. With shock diffusion in the outer sole, any surface should be perfect for walking.If you need an affordable boot, this will certainly be your number one choice.

Pros

  • Low-cut design is stylish
  • The steel toe offers additional safety
  • They are 100% waterproof
  • The outer sole includes shock diffusion

Cons

  • The boots do lack ankle support
  • The lace holders tend to wear out over time

Redback Men's Bobcat UBBK Elastic Sided Soft Toe Leather Leather Work Boot

Slip on into some style and excellent comfort with the Redback Men’s Bobcat Soft toe Leather boots. They are constructed from premium leather and they do not feature any laces. Pulling loops are designed on the boot opening to make them easier to put on.

They are optimised for comfort, support, and durability. The leather has been tanned to reduce the possibilities of it cracking, while the heel has been reinforced with 3 layers for support. The cement method, which includes heat treatment, is used for the outer sole. This offers added durability and strength.

Unfortunately, the boots are not ideal for oil surfaces. They will work fine on wet surfaces, but the lugs are quite small and you might find yourself slipping on oil. They also take some time to break in, which could be slightly uncomfortable on your feet while first breaking them in.

They're affordable and would be a decent budget option. They also offer elasticity for additional comfort and flexibility, which favours those with larger feet.

Pros

  • Ultra light work boots
  • Added durability with the addition of tannage oil
  • They offer good heel support
  • Elastic and versatile
  • Affordably priced 

Cons

  • Not ideal for oil surfaces
  • The lack of a steel toe could be a safety hazard
  • They have to be broken in

KEEN Utility Men's Milwaukee 6" Soft Toe Work Boot

KEEN footwear is widely recognized for their quality and durability. These boots have also been made in The US, which adds another level of credibility to them.

Leather is the primary material used in the construction of the KEEN Utility Men’s Milwaukee 6” Soft Toe Boot. The leather adds some extra durability and since it is tanned with oil, it will ensure prolonged use as well.

A lightweight TPU shank is used for support; this reduces the amount of flexibility but offers you some additional rigidity. The metatomically engineered inner sole can be removed, which means you will be able to wash it as well as replace it with something like memory foam if you are not comfortable with the current sole.

With an ASTM F2892-11 rating, they should work well in electrical conditions and you will not have any safety issues.KEEN boots are a little expensive, but we would definitely recommend them for all the technology. KEEN welt technology has also been included in the outer sole, which improves durability and reduces shock from tough environments.

Pros

  • Approved for electric hazards
  • The outer sole absorbs shock
  • Extremely durable outer
  • The boots are ideal for wide feet with a 15.25-inch opening

Cons

  • These boots are fairly expensive
  • The TPU shank does limit flexibility

KEEN Utility Men's Braddock Low Soft Toe Work Shoe

Finding lightweight waterproof work boots is not easy, but the KEEN Utility Men’s Braddock Low Soft Toe work shoe is not only one of the most stylish you will find, it also features a premium leather construction that is 100% waterproof.

Since the shoe is waterproofed; it eliminates any stress of watery puddles in the work place. Now you will have the freedom of using your KEEN boots for your outdoor jobs as well. A TPU shank has also been used for the rigidity, but thanks to the design, you should have some decent flexibility.

This boot is much similar to the previous one and a metatomical engineered foot bed is included. The foot bed is also removable and washable. If you do not feel like PU cushioning is ideal for your feet, you will have the opportunity to have it removed and place in your very own memory foam or EVA insole.

Compared to many similar shoes, this pair is quite expensive. It is; however, very lightweight at 1.5 pounds, but no steel toe is included. We would not recommend these boots for construction purposes.

Pros

  • Durable premium leather construction
  • The design is stylish and the colors work perfectly
  • Removable inner sole
  • Offers exceptional support with the TPU shank

Cons

  • These boots are quite expensive
  • The insole lacks some cushioning

Irish Setter Men's 83605 6" Work Boot

Featuring a classic moc-toe design, the Irish Setter Men’s 83605 6” work boot is designed for virtually any surface. The upper features premium grade tanned leather and this adds more durability and flexibility to the boot.

The mid-cut design has been specifically made to help the ankles. By fully lacing up the boot, you will see just how much it constricts around the ankle. Padding is added to the collar, providing some additional comfort and warmth.

A white rubber EVA outer sole with traction tred lugs will ensure you never slip. EVA is also used for the midsole, which eliminates any break in period. The sole also molds to the shape of your feet and will be ideal for pronation and supination.

These boots are expensive, but they offer a lot of support and comfort for virtually any line of work. Unfortunately, no steel toe is included, which might not be ideal for construction workers, but we would recommend them for factory workers.

Pros

  • Stylish moc-toe design
  • Slip and heat resistant outer sole
  • EVA insole for additional comfort
  • Padded collar reduces any possible abrasions

Cons

  • White outer sole shows dirt easily
  • The boot lacks ventilation
  • No safety toe

Wolverine Men's Blade Lx Waterproof 6" Comp Toe Work Boot

Last but certainly not least, we have the Wolverine Men’s Blade Lx Waterproof 6” Comp Toe work boot and this boot might be a little heavier than the others, but it is still much lighter than some of the other top-rated composite toe boots.

The mid-cut design is exceptional and it also adds to the style of these boots. It offers exceptional ankle support and with the 100% leather construction, you will have maximum durability. To further reduce the weight, they have added a nylon shank, which gives you some stability but without the extra weight from steel.

As the most expensive boots on our list, you might expect something special and they do offer that in the composite toe. CarbonMAX nanotechnology is used, which is lightweight and offers the same protection as a steel toe. They have also included a fatigue-fighting epx foot bed to reduce the strain from working prolonged hours on your feet.

Pros

  • Composite toe is lightweight and safe
  • Durable leather construction
  • Larger rubber lugs on the outer sole to reduce slips
  • Fatigue fighting technology in the inner sole

Cons

  • Expensive price tag
  • Boot size can run slightly large 

And the winner is...

Choosing the best lightweight work boots is not an easy task and once you have chosen a few, it can be a tough task to choose the overall winner. We have decided to choose the winner based on the affordability and the features that it offers.

Our winner is the KEEN Utility Men's Atlanta Cool Steel Toe Work Shoe offers all of the features needed at an affordable price. KEEN has reduced the price and still included their top technology and features which make this one of top work footwear on the market.

We would like to thank you for reading this article and we hope that you have found the ideal footwear for your specific needs. Since the best steel toe boots can be so hard to find, we would like you to let us know in the comment section whether we have missed any of your favorites.

Best boots for Construction – Protect Your Feet and Stay Comfortable

Your alarm just went off, the sun’s already peeking through the blinds, and as you go to slip your work boots on, you realize the soles are beginning to separate and a horrific odor is emanating from inside. This is a realistic situation that a lot of construction workers face at some point.

Worry not, we’re here to help you find the best boots for construction that will last, keep you comfortable, and protect your feet from workplace hazards.

After we go through the key features that you should look for, we’ll review the seven top products ready to fit any and all of your needs.

Boot

Design

Comfort &
Protection Rating

Price

caterpillar mens second shift steel toe

Top Pick!

Caterpillar Men's Second
Shift
Steel toe

$

Timberland PRO Men's Pitboss 6 Soft toe

Timberland
PRO Men's
Pitboss 6"
Soft toe

$$

Thorogood American Heritage 6 Steel-toe

Thorogood American
Heritage 6"
Steel-toe

$$$

Irish settler mens 6

Irish Settler
Men's 6"

$$

Timberland Pro Men's Titan 6 Waterproof Safety toe

Timberland Pro
Men's Titan 6"
Waterproof
Safety toe

$$$

ever boots tank mens soft toe insulated

Ever Boots
"Tank" Men's
Soft Toe
Full Grain Leather
Insulted

$

keen utility mens Detroit soft toe

KEEN Utility 
Men's Detroit
Mid Soft-toe

$$

Common Features of the Best Construction Boots

Safety Features

Construction sites are notoriously dangerous and prevalent with all kinds of hazards that can harm your feet. As such, it’s important that you have footwear with proper protective features.

Toe Protection

One of the key components to any good pair of construction shoes is safety toe caps. From falling objects to stubbing your toe on hefty equipment, quality toe protection is usually a requirement for most construction jobs. Depending on what your job wants, you have a few options to choose from.

Steel

Tried and true steel is still one of the most popular (and often required) materials that safety toes are made with. It’s going to give you the most impact protection, but it’s also going add a good amount of weight to the boots.

Men working in tunnel with machinery

Alloy

Gaining popularity due to their lightweight design, alloy safety toes are made from lighter metals that still offer significant protection. They’re not quite as strong as steel, but the extra toe room is a nice benefit.

Composite

This type of toe cap is made from nonmetallic materials. Surprisingly, composite safety toes still offer high-grade protection (though not as much as steel or alloy). They’re going to have a bulkier design, but it’s a great option if you’re exposed to colder weather.

Metatarsal Guards

Even if you have your toes covered, you might be wondering about the rest of your foot. Metatarsal guards will serve to protect the upper portion of your feet from any harmful impacts that might extend beyond the toe region.

Some boots will come with them built in either internally or externally, but if your boots don’t, you can always purchase some separately. Keep in mind that while metatarsal guards add extra protection, they also add some weight and aren’t known for being the most comfortable.

Puncture Resistance

Whether it be nails, glass, or other sharp objects, construction sites are typically littered with hazards waiting to pierce your shoes and feet. Your best defense against this is going to be a combination or two features.

sole of footwear about to be punctured by screw

Thick Soles

Durable rubber soles will pay for themselves over and over again. Being that it’s a naturally puncture resistant material, the thicker the sole, the better the protection.

Shanks

Along with helping your boots keep their shape and give you some much needed energy return, shanks also act as a good puncture resistant layer. They can be made from any number of materials like wood or fiberglass, but the best ones for protection purposes are steel.

Durability

Not only do job sites present serious safety hazards, but they also happen to put some serious wear and tear on your footwear. In order to make sure that you’re not investing in new boots every few months, durability is of great importance.

Full Grain Leather

The holy grail of work boot durability is full grain leather. This naturally waterproof and scuff resistant material is the most popular and an easy choice when it comes to picking your footwear. The thicker the leather, the better the durability.

Laces of leather footwear stitching

Goodyear Welt

Of the two methods for joining soles to the rest of the boot, the Goodyear welt technique is going to offer the longest lasting durability. Although it does sacrifice some flexibility, the Goodyear welt allows you to replace the soles as they wear out, increasing the wear life.

Stitching

While often overlooked, stitching plays a key role in the durability of footwear. Great designs for any hard worker will offer reinforced stitching to ensure that nothing splits or falls apart as they’re inevitably exposed to harsh working conditions.

Comfort

Your job requires you to be on your feet for hours on end, and so naturally, comfort should be a top priority. Good boots for working hard will have multiple layers of comfort features that all work together to give you an enjoyable experience.

It always starts with the soles. If you don’t have a solid foundation, then you’re going to be feeling it at the end of the day. The job of the soles is to take on the initial impact as you walk across unforgiving surfaces, amongst other things of course.

Midsoles are the next layer of defense that serves an important role - stability. This layer can be made from an array of materials, but their job is to absorb shock waves and help support your foot with each and every step. Without proper support, joint and bone damage can slowly set in.

Bulldozer and construction workers wearing safety gear

As you get to the interior of your footwear, insoles are the last and possibly most important feature. This is the layer that your foot will come in direct contact with. High-quality insoles will provide ample arch support, pressure point alleviation, and a breathable membrane that helps to deal with any sweat (more on this in the next section).

Breathability

Let’s face it, every construction worker has to deal with sweaty feet at one point or another. Breathability features will make sure that your feet receive proper ventilation and keep moisture out of your boots.

Mesh lining is the staple of breathability features that often also includes a waterproof membrane. Whether it’s water that makes it inside or the heat of the day that begins to get to your feet, moisture is a surefire way to compromise all day comfort.

In order to ensure full foot coverage, insoles can also have breathability built in. While it’s not a necessary feature, if you’re prone to sweaty feet or just want an extra layer of defense, it’s something you should look for.

Traction

More than likely, you’re going to presented with a combination of both slick and unstable surfaces on the building site. This poses a serious safety concern that can end up leaving you out of commission without proper footwear.

Sole of footwear on slippery surface

Top workwear boots will have rubber soles. All rubber soles are going to provide you with slip resistance, but some will also have you covered for things like oil and chemicals. Another feature to consider looking for while not directly related to traction is heat resistance. You don’t need your soles melting on the pavement after all.

Deep and aggressive tread patterns are great at gripping onto surfaces and keeping you stable. If you’re climbing around equipment, on a building, or up a gravel pile, the last thing that you want to worry about is losing your footing.



7 Work Boot Reviews

Caterpillar Men’s Second Shift Steel Toe Work Boot

Caterpillar Men's Second Shift Steel toe

When you think of construction site footwear, these are the ones that come to mind. Dark full grain nubuck leather gives off a striking appearance while providing a long lasting durable layer ready to tackle job sites.

Between the Goodyear welt and thick slip resistant rubber soles, you’re sure to keep your footing and you don’t have to worry about sole separation. The protective steel toe is also electrical hazard safe up to 600 volts, a great addition if you work frequently around live wires.

Along the inside, these shoes have been built with Caterpillars proprietary Climasphere technology which will wick away moisture and support your foot with cushioning. For the product that does it all on a budget, these are easily some of the best construction boots.

Pros 
  • Long wear life
  • Excellent breathability (thanks to mesh lining and insoles)
  • Good ankle support
  • Strong steel toe design
  • Affordable price tag
Cons
  • Long break in period

Timberland PRO Men’s Pitboss 6-Inch Soft Toe Boot

timberland pro mens pitboss 6

Timberland understands that construction workers put an extra hard beating on the soles of their shoes, which is why they made these heat, oil, slip, and abrasion resistant. The rugged full grain leather is made even more durable as the seams are all reinforced with extra stitching.

Along the top, padding helps keep debris out and ensures a comfortable but snug fit with ample support. The inside is lined with a soft fabric lining that’s equipped with odor control technology for combating sweaty feet.

You’ll enjoy multiple layers of comfort technology with the Timberland signature comfort system which provides great cushioned support, but the additional shock absorbing midsoles makes walking on concrete a dream. If comfort is your top priority, we strongly consider these some of the best work boots for construction.

Pros 
  • Long lasting durable soles
  • Superior comfort that lasts all day
  • Roomy but secure fit
  • Odor control
  • Flexible design
Cons
  • Heavy build
  • Ankle area can cause discomfort
  • Minimal safety toe protection
  • Sizing is difficult

Thorogood Men’s American Heritage 6” Safety Toe Boot

Thorogood American Heritage 6 Steel-toe

The Thorogood brand is legendary for creating high-quality footwear, and one look at these will tell you why. To start, they have a taller design than your average pair of construction boots, and the thick laces travel all the way up to the top so you can expect excellent support.

Slip resistant and non-marking outsoles give you a firm base to stand on while the reinforced Goodyear welt makes sure you get the longest wear life. Multiple shock absorbing layers and a fiberglass shank provide you with exceptional energy return and keep you fatigue free even over the longest work shifts.

Breathable mesh lining on the inside keeps you cool and the dual density insole cradles your feet well. They’re not the cheapest pair on this list, but the Thorogood brand makes them well worth the investment.

Pros 
  • Quality laces and durable eyelets
  • Excellent shock absorption
  • Tall supportive design
  • Safety toe
  • Ability to last for years
Cons
  • Width of boot is wide
  • A little expensive
  • Heel area could have more sufficient support

Irish Setter Men’s 83605 Six-Inch Work Boot

Irish settler mens 6

Between off white soles and the dark waterproof leather, these shoes will demand attention from co-workers. If you work in brutally hot conditions, then you know when asphalt heats up it can actually melt the soles of your boots. Irish Setter provides durable heat resistant soles to prevent this.

Triple stitching reinforces each and every seam on this boot and the roomy moc toe provides decent protection. Before we look at the inside, it’s important to note the additional EVA traction layer they’ve added to the soles so you can be extra confident on slick surfaces.

Smooth nylon lining guides your foot into the shoe where you’ll find a removable footbed that offers welcoming arch support. Being Irish Setter’s and with the level of durability, these are some of the best boots for construction.

Pros 
  • Good for casual or work wear
  • Scuff resistant leather
  • Great traction on all surfaces
  • Comfortable for long shifts
Cons
  • Not fully waterproof (best recommended Waterproof work boots Here)
  • Toe cap can cause discomfort
  • Loose fitting

Timberland PRO Men’s 26078 Waterproof Safety-Toe Work Boot

Timberland Pro Men's Titan 6 inch Waterproof Safety toe

These are ideal for any hard worker that deals with rain and wet environments. Waterproof leather does a great job at keeping water and moisture on the outside, but in case some makes it in, Timberland added a full foot waterproof membrane.

The lightweight alloy safety toe gives you ample protection from falling hazards without adding a lot of bulk. Using a flexible cement construction, your feet have the freedom to move as they need without restriction, but it’s their unique Powerfit technology that makes these boots shine.

The ergonomically correct design supports your feet in all the right ways so you don’t have to experience any discomfort. Lastly, the comfort mesh lining accomplishes breathability and odor control for combating sweat.

Pros 
  • No break in period needed
  • Excellent waterproofing
  • Lightweight design
  • Comfortable and supportive
  • Solid toe protection
  • Superior breathability
Cons
  • Thick tongue can cause discomfort
  • Sizing runs narrow
  • Soles lack durability
  • Stock laces feel cheap

EVER BOOTS “Tank” Men’s Soft Toe Oil Full Grain Leather

ever boots tank mens soft toe full grain leather

Coming in as the most cost effective and simply styled boots on this list, you’re going to be shocked at the number of features packed into them. The supple full grain leather has reinforced stitching all the way around ready to be put to the test.

Thick slip resistant rubber soles with deep treading are attached to the rest of the shoe with a reliable and durable Goodyear welt. In the event that something goes wrong with the soles or leather (though very unlikely), EVER BOOTS includes a 3-month warranty to put you at ease.

With a combination of speed hooks lining the upper portion and the pull-on tab, they are easy to slip on and lace up so you can get out the door faster. On the inside, you have a removable cushioned insole that, while not the best, provides you with enough comfort to be on your feet for hours.

Pros 
  • Padded toe area
  • Lightweight
  • Casual and sleek design
  • Unbeatable value
Cons
  • Basic comfort features
  • Leather lacks long term durability
  • No waterproofing

KEEN Utility Men's Detroit Mid Soft Toe Work Boot

keen utility mens Detroit soft toe

At first glance, you may mistake these for a pair of hiking shoes, but they’re built for versatile use both on and off the construction site. The low profile rubber soles come with an aggressive tread pattern that can grip and hold you firmly in place no matter the surface.

You’ll notice that the toe area is reinforced with a molded layer that can take the brunt of impacts with ease. Wet conditions no problem when you wear these thanks to the waterproof leather and proprietary KEEN lining that creates circulating airflow while keeping moisture out.

An anatomical footbed and shock absorbing plate provide you with superior comfort and support on both flat and uneven surfaces. These are some of the best construction work boots for the versatile wearer.

Pros 
  • Steel safety toe with plenty of room
  • Watertight and breathable
  • High-grade traction
  • Secure and light fit
  • Great for workers with plantar fasciitis
Cons
  • Not build for the heaviest of use
  • Standard laces are too long
  • Seams prone to splitting over time
  • Sizing can be difficult

Our top pick for - Best Pair of Construction Boots

In order to truly know which pair is right for you, you have to know all of the demands your job will be placing on your footwear. As a good mix of value and high-quality features, we’ve selected the Caterpillar Men’s Second Shift Steel Toe Work Boot as the best boots for construction.

They hit all of the most important marks that quality construction grade footwear should have such as a thick durable sole, full grain leather, and a steel safety toe that meets both impact and electrical hazard safety standards.
All of that in conjunction with Caterpillars Climasphere comfort and breathability features tip the scales and make these boots tough to beat with such an affordable price tag.

No matter how tough the job is on your feet, these boots will keep you protected and stick around for the long haul.

1

Best Welding Boots – Comfortable designs that withstand any hot work

Welding is both one of the most rewarding and punishing jobs. When working with the hard material of steel and other metal objects, things really get hot quickly and the work environment becomes hazardous, fast.
Having the right protective equipment is pretty much welding 101, but proper protective footwear is often overlooked.

No welder wants sparks and hot steel fillings burning holes through their shoes, so we decided to write this for the safety of your precious feet. In this article, we’re going to look at some of the special requirements that the best welding boots should have, as well as reviews of the top seven pairs for handling the job.

Boot

Design

Comfort &
Protection Rating

Price

Top Pick!

Timberland PRO
Men's
4000 6"
Steel toe

$$

Caterpillar
Men's
Assualt

$$

Dr. Martens
Ironbridge MG
Steel toe

$$$

Michelin Sledge
Steel toe
Metatarsal
Guard 

$$

Rocky Duty
Men's Modern
Paraboot

$

Caterpillar Men's
Revolver
Pull on
Steel toe

$

Ariat Men's
Groundbreaker
Pull on
Steel toe

$$


Important Considerations for Welders

Hazardous Work Environment

As a welder, you’re faced with more hazards than most. From electrical shock and extreme heat to dangerous welding sparks and embers, an average day on the job can leave your feet in pretty bad shape if you’re not properly equipped.

Electrical hazards are one of the most common and preventable dangers that welders come up against on the job. So, just to be safe, it’s a good idea to look for work boots that are compliant with electrical protection standards. This way, if there’s an open circuit or live wire laying around on the floor, your shoes can stop the shock before it causes any harm.

Hot sparks and molten material are two things that all welders are very well acquainted with. Without the proper protective features, you can find yourself constantly replacing laces or even entire pairs of boots. We’re going to talk more about this shortly.

Welding Boots Steel Toe

One final consideration that doesn’t solely pertain to welding jobs is the need of a safety toe. Welding environments typically have some heavy equipment laying around, or even objects that can fall and damage your unprotected toes. Do yourself a favor and look for boots with safety toes just so you can have that added peace of mind.

Welder makes hot sparks

Without a doubt, when it comes to safety toes, steel is the toughest and most reliable material to turn to. Contrary to popular belief, steel caps are actually just as efficient at protecting the wearer from electrical shock as their nonmetal counterparts.

Metatarsal Guards

These puppies are the bread and butter of welding footwear protection. While not the most visually appealing (usually), metatarsal guards provide an extra layer that folds over top the laces. Once they’re secured down, you’ll have reliable protection from flying sparks and molten material so your laces remain intact, and your feet stay burn free.

Not only do they protect your shoes from damaging heat, but they also protect your upper foot from any heavy objects that may land on your feet. Most of the work boots that we cover in this guide will come standard with metatarsal guards, but for the ones that don’t, you can always buy an attachable pair.

One notable drawback to metatarsal guards would be the comfort factor. Having an extra steel plate on top of your foot that isn’t always the most flexible can cause some discomfort unless there’s extra padding.

Heat Resistance

What good will all of the protection in the world do if your boots can’t handle the heat? Given that welders deal with extremely hot temperatures, it’s important that your shoes are equipped with heat resistant features.

Man working with sparks in workshop

Tried and true leather on top of having great water resistant properties also happens to be the best material for standing up against fiery welding hazards. That being said, the thicker the leather, the better the protection.

Since we’re on the topic of leather, it may be a good idea to replace the existing laces with leather ones for added durability. Even with high quality metatarsal guards, some portion of the laces will be exposed and prone to burning. Leather laces will have you covered.

You’ll also want to make sure that the soles are able to withstand high temperatures. Just like the rest of your shoe, the soles are exposed to high heat and will literally melt if you forego this easily overlooked feature.

Long Lasting Comfort

It’s not uncommon when welding to stand in one spot for a prolonged period of time. If that’s not bad enough, when you do walk around you’re usually on concrete or some other extremely unforgiving surface that’s ready to sap the happiness from your tired feet.

The comfort you need starts with the soles and goes all the way through to the inside of the boots. Proper soles are going to be your first line of defense against the continuous jarring impact from hard surfaces and mitigate the shock.

Midsoles are the next layer, and responsible for giving each step the needed support and energy return to last all day on the job. If you’ve ever experienced the slightest hints of foot fatigue setting in, then you know just how miserable it can become if uncontrolled.

Man uses grinder on worksite

The last line of defense and probably the most important is the insole. These typically removable inserts can come in all shapes and sizes, but all aim to keep your feet feeling supported and comfortable. From arch support and cushioning to moisture wicking, quality insoles will pay for themselves time and time again.

Soles of the Welder

Aside from what we touched briefly on above (heat resistance and comfort), having the right soles is an extremely important factor for welders. Thick, durable soles with decent tread are only the start of what you should be looking for.

Depending on your work environment, you may be faced with less that dry conditions consisting of water, oil, or even chemicals. Slip resistance is a staple for almost all work boots, but having oil and chemical resistance are a great plus too.

In addition to the safety toe being electrical hazard compliant, the soles of your shoes should be nonconductive and dissipate any potentially harmful shocks from reaching you. Check with your employer to see if there are any specific safety requirements for your footwear.

Thickness and quality tread will keep you firmly grounded and protected. Welders are often exposed to sharp objects that run the risk of puncturing soles and damaging the wearer's foot. Treading will make sure that you can grip any surface so you can keep a steady hand with whatever tools you’re using.

Waterproof and Breathability

Of the two, the most important feature that you’ll want to look for is breathability. Welding jobs no doubt get hot, and when that heat transfers down to your feet, you’re going to need a way for the sweat to get out.

Welder works outside on construction site with safety gear

Breathable mesh lining and insoles are the best way to go. These two features will ensure that fresh air gets in and your hardworking feet stay dry.

Waterproof technology is a good measure to have in place if you work in wetter environments. Nothing is worse than having soggy feet while you’re on the job with no way to remedy the problem.

Full Review of Best Waterproof Work Footwear here​


Reviews of the Best Welding Footwear

Timberland PRO Men’s 40000 Met Guard 6” Steel Toe

If there was ever a way to sleekly build a metatarsal guard onto a pair of shoes, Timberland has done it. These dominating boots give off a striking appearance thanks to the dark reinforced leather built for withstanding extreme use.

The heat, slip, oil, and abrasion resistant rubber soles give you a firm protective base to stand on, and the Kevlar stitching provides extra heat resistance and longer wear life. You’ll notice that the met guard is made with a breathable underbelly and comfort features that prevent fatigue.

Timberland’s comfort system will ensure that each step is met with support and cushioning that lasts all shift long. With a steel toe that meets both impact and electrical hazard safety standards, the number of features packed into these easily make them a top choice.

Pros 
  • Great ankle support with the laces
  • Quality arch support
  • Laces protection
  • Long lasting durability
  • Strong Steel Toe
  • Fair price
Cons
  • Heavy design
  • Boot sizes are prone to running tight

Caterpillar Men’s Assault Work Boot

Caterpillar pulled out all of the stops when building these welders boots. Wrapped in durable full grain leather, they’ve done a great job at incorporating a heavy duty heat and puncture resistant metatarsal guard.

The Goodyear welt construction and safety compliant steel toe top off the durability features to ensure they’re long lasting footwear. Lacing eyelets run all the way up to the top of the boot for a secure fit while the padding gives you extra comfort.

Understanding that the welders work environment can get a bit toasty, they’re been built with excellent comfort features that also wick moisture away. However tough the conditions, these shoes were built to give you a combination of confidence and comfort.

Pros 
  • Secure and supportive fit
  • Steel Toe
  • Long lasting soles
  • Wide metatarsal protection
  • Padded collar provides added comfort
Cons
  • Eyelets are prone to breaking
  • Metatarsal guards can press into shins
  • Lacks long term durability

Dr. Marten’s Ironbridge Steel-Toe Met Guard

When you first see these titans, they have heavy duty written all over them. One of the immediate standout features is the thick soles entrenched with deep tread patterns for maximal grip on all kinds of surfaces.

The sole is joined to the waterproof full grain leather body with Dr. Marten’s signature yellow stitching, while the rest is reinforced for extra durability. The extra wide met guard does a great job at entirely covering the laces on the lower and mid parts.

As we get into the footwear, ankle padding ensures comfort and security, and the footbed provides ample cushioning with moisture control. Your toes will have wiggle room and safety with the protection of a welding boots steel toe.

Pros 
  • Slip resistant soles
  • Superior full foot protection
  • Good Breathability
  • Lightweight design
  • Quality waterproofing (but not full)
Cons
  • Comfort features need upgrading
  • Soles are prone to breaking down
  • Long break in period
  • Lack of durability in the long term

Michelin Work Boots Men’s Sledge Steel Toe Metatarsal

The reliable Michelin tire brand decided to take a stab at welders work boots and did not miss their target. Starting with the multilayered soles, they’re excellent at absorbing the initial impact of walking on hard surfaces, and incorporate some aggressive treading.

Both the steel toes and metatarsal guards are impact and electrical hazard compliant, giving you the confidence you need on the job. Flexible yet durable full grain leather along with the direct attach sole give you the freedom to move without restrictions.

The midsoles and insoles of these boots are high-quality with great full foot support so you feel just as good at the end of the day as you did at the beginning. They’re not going to be the cheapest boots on this list, but they’re definitely top contenders.

Pros 
  • Roomy middle section for wide feet
  • Great arch and heel support
  • Quality traction on all surfaces
  • Secure ankle area prevents rolling
Cons
  • Toe area can be a bit narrow
  • Soles are prone to separation
  • Heavy build
  • More expensive

Rocky Duty Men’s Paraboot

These boots have an almost tactical feel and look to them. A tall 10-inch design ensures that you have protection that goes halfway up your calf. They’ve incorporated a side zipper to make the process of getting them on and off a breeze.

Slip and oil resistant rubber outsoles come with a built in stabilizer to return precious energy to you with each and every step. While the toe doesn’t offer any kind of protective toe cap, it is made from a polishable material to give you a sharp and professional look.

Full grain water resistant leather completes the outside of this shoe as we take a look internal contoured footbed. Whether you’re standing for hours or walking back and forth along unforgiving concrete, your feet will be taken care of.

Pros 
  • Easy on and off
  • Superior ankle support (height, laces, and zipper)
  • Flexible with little to no break in
  • Professional polished look
  • ​Waterproof
  • High design provides extra protection from sparks, flames, embers 
Cons
  • Thin leather lacks durability
  • No metatarsal or toe protection
  • Heel area prone to causing blisters
  • Zipper is known to break

Caterpillar Men’s Revolver Pull-On Steel-Toe Boot

For a sleek and basic looking set of pull-on work shoes that can take a beating, these will fit the bill. Minimal stitching and full grain leather wrap and provide a solid waterproof base to keep you dry in wet conditions.

The lace free design eliminates the need for a bulky metatarsal guard which helps to keep them light on your feet. A durable slip resistant rubber sole offers some pretty deep tread patterns, and the steel toe will still keep you protected from any heavy objects you inconveniently encounter.

Along the inside, your feet will be met with comfortable breathable mesh lining that works to keep the cold and moisture out. For pull-on boots, these will handle most all of your welding needs for a very reasonable price tag. It’s easy to see why we’ve selected them as some of the best welding footwear.

Pros 
Cons
  • Lack of arch support
  • Stitching prone to splitting
  • Waterproof features are sub par

Ariat Men’s Groundbreaker Pull-On Work Boot

Ariat decided to take these boots old school with a little Western flare. The stylish design starts with Ariat’s own slip and oil resistant Duratread outsoles which were built to withstand rigorous, constant use day in and day out.

After that, between the shank and 4 different layers of comfort features, your feet will feel like they’re walking on clouds. The leather and flexible sole have just enough give to not restrict your movement, and also stave off fatigue.

Pull-on tabs along the sides make them fast and easy to slip on and get out the door. Finally, they’ve got a built in 90-degree heel area that provides greater support and comfort. Whether for work or casual wear, you’ll be feeling good in these Ariat’s.

Pros 
  • Very affordable
  • Flexibility
  • Tall design keeps debris out
  • Steel Toe
  • Comfort features great for hard surfaces
  • Stylish design
Cons
  • Run a little tight
  • No metatarsal protection
  • Leather is prone to scuffing

Revealing the Best Footwear for Welders...

By now, you’ve got a pretty good idea as far as what to look for in the best welding boots, and some top products to choose from. The footwear that stood out to us the most and hits almost all of the feature checkmarks is the Timberland PRO Men's 40000 Met Guard 6' Steel Toe Boot.

They’re impact, electrical, slip, oil, and abrasion resistant and compliant. With soles that can withstand temperatures of up to 1000 degrees Fahrenheit and metatarsal guards built with comfort in mind, these shoes are the equivalent of wearing fortresses on your feet.

Wrapping it up with the signature Timberland 24/7 Comfort Suspension system, you can be sure that they will keep you feeling comfortable and happy no matter how long the day. You can’t go wrong with these welders work boots which give you both confidence and comfort.

Best Landscaper Boots | For Your Outdoor Jobs

Being a landscaper is both tough and rewarding. Great landscapers can make their client’s dreams come true, but not without hours of getting down and dirty.

Naturally, great boots are going to have to be able to withstand harsh elements, water, dirt, and plenty more all in a day's work.

We’re here to help you find the best landscaper boots that will keep you comfortable and safe so you can focus more on the job at hand.

We’ll start by identifying some of the most important features to look for in your footwear, and then, it’s on to the reviews of the top three products.

Boot

Design

Comfort/
Protection rating

Price

Top Pick!

Timberland PRO
Men's
Hyperion 
WaterProof

$$

Carhartt
Men's 6"
Rugged Flex
Composite toe

$

Ariat Men's
Terrain H2O
Hiking

$$

Features Found in the Best Landscaping Boots

Comfort

Landscapers are well known for working long, full day shifts that require lots of standing and other strenuous activities.
Without a doubt, you’re going to want boots with comfort features that can keep your feet happy from dawn till dusk.

Shock Absorption

While your work boots face a variety of different surfaces (some hard and some soft), having shoes with built in shock absorption will help prevent fatigue from setting in.
Without it, after 8-10 hours of constant impact shock, not only will your feet begin to feel it, but so will your bones and joints.

Man lays sod for new lawn in garden

Comfort Insoles

The goal of comfort insoles is to provide your feet with a cushioned and supportive surface. Coupled with ample shock absorption, it’s the job of the insoles to give you pressure point alleviation and arch support especially while work on many different outdoor terrains(Full guide of the best boot insoles here)

Energy Return

If you’re walking a few thousand steps per day, you’re going to need boots that work to preserve your energy and keep a spring in your step. Anatomically correct insoles will help make sure that your feet are properly aligned with each step, while a built in shank assists with returning energy to you.

Breathability

Working under the scorching sun for hours on end won’t just make your face sweat, but your feet as well. We think it’s safe to assume that no landscaping workers like to have moist feet and wet socks on the job.

Mesh lining is the best defense against internal moisture and helps to regulate temperature. This porous material can create a circulating airflow that wicks away sweat and keeps you cool on the hottest of summer days.

You should also check to see if the insoles have built in breathable technology to ensure that no part of your foot is left too warm. On the outside, some boots even incorporate mesh into the exterior build to increase circulation and temperature control.

Waterproofing

Man waters garden with hose

This one is a no brainer. Sun or shine, as a landscaper you’re going to be faced with wet, muggy conditions. No matter how breathable your boots are, it’ll do no good if they aren’t waterproof or water resistant(Full guide to waterproofing boots here)

Leather

Leather is the most popular material not only for its rugged durability but because of its natural water resistance as well. Treated waterproof leather is going to be your best line of defense against the elements.

Seam Sealed Stitching

Seams are usually the first area of a shoe that gets compromised and begin to leak. Extra sealing placed along the seams will increase their durability and ensure that you don’t have any water infiltration.

Waterproof Membrane

water droplets on water resistant membrane

The best work boots for landscaping will also have a built in waterproof membrane to handle any moisture that happens to make it inside. If you know you’re going to be working outside in rainy conditions, having this feature will give you some extra peace of mind.

Durability

Pretty much nobody likes to open their wallet for more work wear, especially if you feel you didn’t get the best lifespan out of the previous pair. Landscaping jobs put boots through more wear and tear than most, which is why durability is so important.

Boot Materials

As we touched briefly on above, leather is going to be the king of durability. It’s scuff resistant, water resistant, and has the longest lasting wear life. While it may not be the most flexible material right out of the box, once it’s broken in, your feet will feel right at home.

Nylon mesh is another popular material that you will find due to its breathable properties. It’s not as durable as leather, but if you work in extremely warm environments on a regular basis, you may want to consider boots that use both leather and nylon mesh.

Soles

Thick rubber soles can stand up to an incredible amount of wear before giving out. In fact, the reason that most shoes are replaced isn’t because the rubber soles break, but because the treading finally wears down until it’s ineffective.

Soles of shoes on grass

That being said, Vibram soles are also another great option that can offer a durable alternative to rubber. They will usually cost you a few extra bucks, but in some cases, they will outlast their rubber counterparts.

Construction Type

The two most popular construction types used for work shoes are Goodyear welt and cement direct attach. While each offers its own pros and cons, Goodyear welt is going to be the most durable of the two.

However, with landscaping jobs, flexibility is just as important as durability. For that reason, a lot of the top outdoors footwear will have the cement construction so as to not add any additional weight and ensure that workers don’t have their movement restricted.

Boot Weight

Another often overlooked factor when picking out footwear is the weight. When you’re walking around for hours a day, even a few extra ounces can make a noticeable difference.
Certain features add extra weight, and so it’s important that you get boots that cover all of your needs without a bunch of extras that don’t apply to your line of work.

Toe of footwear with laces

Here are some of the heaviest features in work shoes:

  • Leather
  • Thick rubber soles
  • ​Goodyear welt construction
  • Safety toes (composite toe vs steel toe)
  • ​Metatarsal guards
  • Steel components (such as a shank)

Reviews - Best Footwear for Outdoor Jobs

Timberland PRO Men’s Hyperion Waterproof Work Boot

Right off the bat, you’ll notice that this footwear has a serious high-tec look. Composed of both waterproof leather and some nylon, whatever water passes through will be stopped in its tracks by the built in waterproof membrane.

Slip, oil, and abrasion resistant Vibram soles come complete with aggressive tread patterns for great traction on the job, which is important for work place safety. To increase the external durability, Timberland has reinforced the leather surround the toe and heel areas for withstanding the most rigorous of use.

Finally, a built in shank and shock absorbing technology will keep you fatigue free all day long. On the inside, you’ll a comfortable footbed that provides ample support as well as antimicrobial protection so no bad odors can accumulate.

Pros 
  • Very light on the feet
    (reviews of lightweight work boots here)
  • Great supportive comfort features (especially if you have plantar fasciitis)
  • ​Long lasting soles
  • ​Watertight and excellent breathability
  • ​Flexibility that moves with you
  • Well priced
Cons
  • Plastic around the heel could be more durable 

Carhartt Men’s CMF6366 Six-Inch Composite Toe Boot

Carhartt built these with comfort as a top priority. The cement construction and shock absorbing rubber soles provide a comfortable base that gives the wearer superior flexibility and no hindrance of movement.

Waterproof leather and a padded tongue do a decent job at keeping moisture and debris out of the boot while the speed hooks ensure you can lace up fast with great ankle support. Along the inside is where these boots really begin to shine with a comfortable multi-layered insole.

Your toes will be protected by the roomy composite toe so you don’t feel cramped, and the built in steel shanks return energy to each step you take along with added puncture protection. For the number of features, it’s easy to see why these are some of the best landscaping boots.

Pros 
  • Roomy toe with protection
  • Great comfort for long shifts
  • ​Able to accommodate wide feet
  • ​Secure fit with ankle support
Cons
  • Leather lacks durability
  • Not fully waterproof
  • ​Lengthy break in period

Ariat Men’s Terrain H2O Hiking Boot Guinness

These shoes are built for the versatile worker looking to use them both on and off the job. On first glance, you can tell they were built to last with the signature Ariat Duratread sole, double stitched lining, and reinforced leather around the toe and heel areas.

If that’s not enough for you, they’re equipped to handle even the wettest environments with fully waterproof leather and a waterproof membrane for good measure. What really tops these boots off is the Ariat ATS system which is designed to create a stable and supportive environment for your feet while working outdoors.

Between the stability and shock absorbing midsole, your feet will be well taken care of on any surface your walking or standing on. When looking for work boots for landscapers, you’ll be hard pressed to find competitors at this price with as many features.

Pros 
  • Easy to clean
  • No break in period
  • ​Superior arch support (great for longer shifts)
  • ​Versatile use on and off the job
Cons
  • Shallow treading
  • Large heel area can leave too much room
  • ​Stitching lacks durability over time

Our Winner is...

We’ve covered a lot of information and some great footwear that’s ready to stand up to the test of any landscaping job.
Our selected winner as the best landscaper boots is the Timberland PRO Men’s Hyperion Waterproof Work Boot.

From multiple layers of waterproof protection and a rugged, durable exterior, to the shock absorption and incredible comfort features, these shoes will get you through any project.
They were built for workers that are on their feet all day by giving you quality protection so you can work confidently, and high-grade support features so your feet are still feeling great at the end of the day.

Whether you’re replacing an old pair or buying your first pair for a new job, these Timberlands won’t let you down.

Best Work Boots For Concrete Floors – All Day Use (2018)

If you work on or in concrete. Congratulations, you’ve got yourself one of the most punishing jobs on your feet. As such, it’s important that you have the best work boots for concrete floors so you can stay comfortable and safe all day long.

Before we get into all of the reviews, it’s important to know which kind of work boot you’re going to be needing.

Do you work 'ON' or 'IN' concrete? Whichever applies to you, this articles covers the best footwear for both cases.

We are going to take an in depth look at the key features that each work boot should have, as well as review the top three boots in each category.

Top 3 boots for working 'on' Hard Surfaces 

Boot

Design

Comfort Rating

Price

Top Pick!

Wolverine
Raider

$$

Red Wing
Heritage Men's
6" Classic 
Moc toe

$$$

Thorogood
American
Heritage 6"
Moc toe

$$

Top 3 boots for Working 'in' Wet Cement

Boot

Design

Protection/
comfort Rating

Price

Top Pick!

Original 
Muckboots
Muckmaster
Hit cut

$$

Servus 
Comfort 
Technology
14"
Steel toe

$

Baffin 
Tractor PT
Men's

$

What features you should look for when working 'On' Concrete

Man does up footwear hard surface

Shock Absorption and Mitigation

If you’ve been working on concrete, then you already know just how punishing it is on your feet and joints. If you’re about to begin a job working on hard surfaces for hours a day, then it’s a good thing you found this article to help you make the right choices.

Without a doubt, one of the most important features to look for in the best boots for working on concrete is quality shock absorption. Unlike other materials, concrete creates one of the most unforgiving surfaces that will send damaging shock waves up through your feet and joints.

In order to prevent this damage from manifesting and progressing into greater problems, you need to have the proper shock absorbing technology and materials built into your footwear and insoles.

Midsole

The midsole of a shoe is generally the first line of defense that brunts the initial impact with each step you take. There are a number of different materials that midsoles can be crafted from, but the two most popular are EVA and polyurethane.

EVA midsoles have great shock absorbing properties without adding much weight. The only downfall to this material is its lack of durability over the long run. After enough general use, EVA midsoles will lose their cushioning ability and no longer serve its purpose.

Polyurethane midsoles are higher quality, but they typically bump the price tag up a few dollars. This type of midsole can withstand substantial use and still maintain all of its shock absorbing properties. It does weigh slightly more than EVA, but that’s a small sacrifice for the increased wear life.

Insoles

fitting the right insole

After the midsole, it falls to the responsibility of quality insoles to absorb any remaining shockwaves from the jarring impact of solid surfaces. Most of the best work boots for working on concrete will come with good insoles, but sometimes you may find it necessary to upgrade to better ones.

What’s important is that the insoles support your foot from multiple aspects. Proper arch support, shock absorption, and pressure point cushioning are a few of the important features you should look for.

Foot & Ankle Support

As we touched on briefly above, working on hard surfaces can be very damaging to your body. Without proper support from your footwear, your day to day job can slowly wreak havoc on your bones and joints.

On top of shock absorption, the right insoles will have a contoured fit that cradles your foot with each step. This will help to ensure that your foot remains anatomically correct on the job so you don’t have to worry about developing any annoying problems.

Moving a little higher up, we get to the ankle support. Top footwear will come equipped with ankle support features such as a taller design and adjustable straps.

Durability

Men look at safety footwear

This feature pretty much applies to all work boots but is especially important when looking for high-quality concrete boots. Being that your shoes are the only line of defense between you and the rough surface, they need to be able to hold up over the long run.

Rubber soles and leather construction are a top factor to look for, for a good reason. Not only does rubber carry natural slip resistance, but it’s also able to stand up to the wear and tear of the toughest job sites.

Leather is a strong, durable material that will usually outlast the other features of your workwear. Cement work sites are notoriously unforgiving on footwear and leather can provide you with great scuff resistance along with natural waterproof properties to ensure that they don’t fall apart.


Reviews of the Best Boots for Working On Concrete

Wolverine Men’s W02421 Raider Boot

The Wolverine brand built these rough and tough boots for the long shift worker.
With comfort in mind, the soles are lined with shock absorbing padding to take on the brunt impact force. The sole is joined to the rest of the boot with a durable yet flexible contour welt.

Between the midsoles and removable multi layered insole, your feet will be cradled and supported from dawn till dusk. No matter how hard the ground, Wolverine’s technology does an excellent job at keeping you protected.

Sleek full grain leather finishes them along with a padded collar for extra comfort and support around the ankles. For the price, these are some of the best work boots for walking on concrete.

How good are Wolverine Raider boots?
Check out some the features that will make you look and feel good during your  work day!

Pros

  • Great comfort and arch support
  • Roomy toe area
  • No break in period
  • ​Lightweight and flexible
  • Long lasting sole

Cons

  • Sizes can run narrow
  • Not waterproof

Red Wing Heritage 6” Moc Toe

Right out of the box, you’ll notice the stylish design that’s sure to gain the recognition of fellow workers.
The thick, high-grade durable leather build offers a tough line of defense against common construction site hazards while having water, stain, and perspiration resistance.

Stand out white wedge soles provide excellent cushioning as you walk across unforgiving hard surfaces and have a low tread so they don’t track all of the debris into your house and car. While not the most modern, layers of leather and cork help to mitigate damaging shockwaves that travel up toward your feet.

For lasting durability, they’re equipped with a Goodyear welt construction to ensure they have maximal wear life.
They’re not the cheapest, but Red Wing definitely delivers and makes them one of our top footwear picks when your job is on concrete.

Pros

  • Cushioning wedge outsole
  • Natural and comfortable fit
  • ​Stylish design
  • ​Long lasting durability

Cons

  • Not the best slip resistance
  • Leather is stiff until broken in
  • ​Sizing can be tricky

Thorogood Men’s 814-4200 American Heritage 6” Moc Toe Boot

The first thing you’ll notice about these work boots is the supple yet extremely durable leather. Non-marking slip resistant white wedge soles provide your feet with the kind of support and energy return you need while working on concrete.

They’re further supported by a strong Goodyear welt attachment and built in shanks that help them keep their shape. Superior materials create the midsoles and insoles, giving them some of the best comfort and shock absorption around.

Along the inside, your foot will be guided in with soft breathable cotton lining to give you a snug and cozy fit. The Thorogood brand is well known for their quality construction and features which is why we feel they’re one of the most comfortable work boots for concrete.

Pros

  • Foot support and energy return
  • Great for casual and work wear
  • ​Withstands rigorous use
  • ​Durable and flexible leather
  • Superior all day comfort

Cons

  • Collar area can rub ankles
  • Leather prone to scuffing
  • ​Toe box can be tight

What Are the Best Work Boots For On Concrete Use?

Each of the boots we reviewed above are top contenders in the category of working on concrete. Understanding the needs of workers, we’ve picked the Wolverine Men’s W02421 Raider as the best work boots for concrete floors.

They come loaded with comfort features from the soles all the way through to the insoles by providing multiple layers of protection for both shock absorption and support. Superior arch support make these a top choice for anyone suffering from chronic foot problems, and the durability will be evident as you put them through day after day use.

Wolverine created these boots to help workers withstand standing on tough surfaces, and we’re sure they will more than exceed your expectations.


Work Boot Features For Jobs 'In' Concrete

Waterproof & Water Resistance

Not only do you need to worry about dragging your feet through thick, heavy mixture, but you also need to make sure that nothing gets inside of your work boots. If you work with and in liquid cement, they'll need to be waterproof.

3 men working cement trowels

Almost all work boots built for in-concrete use are constructed with a rubber build. Rubber naturally has waterproof properties and is extremely easy to clean (hint: easy cleaning will save you precious off the clock time).

Ideally, you don’t want to have lots of seams connected because that serves as a weak spot for moisture entry. Look for work boots that combine multiple water resistance features and provide you with the best protection from workplace liquids.

Boot Height & Clean Time

Concrete is a sloppy compound to work with that will no doubt leave your boots a caked, splattered mess at the end of each work day. As we mentioned above, rubber boots not only the easiest to clean, but being a non-porous material, the concrete won’t be able to compromise the durability.

Having boots with a taller offers better ankle support than their shorter counterparts, and they also prevent any work site debris (including liquid cement) from entering your shoes. Additionally, it provides your ankles and calves with better protection from on the job hazards.

Safety Toe

Most construction sites will have heavy equipment that present hazards to your feet. Having a safety toe built into your boots will provide you with extra confidence, as well as needed protection. Below, we’ve covered a quick rundown of the different safety toe types.

2 men work cement pour
  • Steel toe:  The most durable toe protection type that is capable of withstanding extreme impact force. As a result, it has the heaviest design and is prone to causing toe discomfort.
  • Alloy toe:  Lightweight metals such as aluminum. They provide high-grade protection without adding much weight, and also offer a roomier alternative.
  • Composite toe: Made from synthetic materials such as fiberglass and plastic. They offer good protection and the lightest weight. Their design is usually bulkier and results in less toe room.

Reviews of the Best Boots for Working In Concrete

The Original MuckBoots Hi Cut

MuckBoots did a great job at taking the usual bulky looking design of rubber work boots and created this sleek pair. They’re composed of both rubber and a flexible, breathable nylon upper to ensure a snug but comfortable fit.

The soles come with great traction patterning and offer a generous layer of shock absorption.
Both the heel and toe areas are reinforced where the wear and tear usually sets in first so they have extra long wear life.

On the inside, the heel area is lined with extra support so your footing remains firm and anatomically correct on all surfaces. They come with a moderate price tag that is more than justifiable given the features and are most comfortable work boots for concrete in our opinion.

Pros

  • Waterproof 
  • Insulated for cold weather
  • ​Simple to clean
  • ​Lightweight
  • Affordable price

Cons

  • Lacks sufficient breathability
  • Rubber portion can be stiff

Servus Comfort Technology 14” PVC Steel Toe Work Boots

You will have a hard time finding such high-quality boots at the price tag these Servus work boots carry. The tall design is composed of a seamless layer of waterproof PVC to ensure that no moisture invades your foot space.

You’ll notice the deep treading and strong slip resistance, both of which will keep you grounded and focused on the task at hand. Fully equipped with steel safety toes, the boots are surprisingly flexible so as to not restrict your movement.

Lastly, as we get to the inside, they come with removable comfort insoles. They’re not meant to be worn for hours and hours at a time, but these boots for concrete workers will be sure to keep you dry and safe until the job is completed.

Pros

  • Completely waterproof and seamless
  • Very affordable
  • ​Easy to get on and off
  • Good traction and durability
  • Resistance to chemicals

Cons

  • Heavy design
  • Heel prone to causing blisters
  • Sizes run large

Baffin Men’s Tractor Industrial Rubber Boot

When you think of traditional rubber work boots, these ones will fit the bill. Don’t let their simplistic appearance fool you, the durable full rubber build is extremely high-quality and equipped to withstand rigorous use.

They offer a tall design so you can be sure nothing sneaks into your boots, but the collar is wide enough to allow an easy on and off process as well as free movement. Once your foot is inside, the fit is snug so you won’t feel like they can slip off in the solid cement mixture.

The soles of these boots are just as durable as the rest of it, and also self-cleaning. A simple spray down with the hose will have them looking as good as new and ready for the next day.

Pros

  • Extra tall design
  • Spacious but snug fit
  • ​Good in both rain and snow
  • ​Seamless welds (very water tight)
  • Light on the feet

Cons

  • Lack of arch support
  • Large and clunky exterior
  • ​Rubber prone to cracking if not cared for

The Best Work Boots For In Concrete Use

If you’re going to be dragging your feet through thick cement, any of the above boots will help you handle the job with flying colors. In terms of quality and features, we’ve selected The Original MuckBoots Hi Cut as the best boots for working in concrete.

The unique rubber and nylon design maintain a tight waterproof shell while giving you a snug and secure fit. Not only do they look sleek (as much as they can for this style), but cleaning them is an easy process that takes almost no extra time so you can get to relaxing once it’s time to punch out.

It's easy to see that they are some of the best work boots for concrete. These MuckBoots won’t let you down and have the ability to last for a long time.

Best ice fishing boots: Keep your feet fully insulated on the ice

Fishing on the ice is a fun and adventurous experience, but with all the ice and the water, one could easily assume that it is designed to freeze your toes.
Many people still find themselves entering this cold domain as part of their everyday life and without the right boots; you will certainly be at the mercy of the conditions.

The ice is certainly not everyone’s friend and cold feet can take a long time to warm up. If you are making your living by fishing on the ice, the best ice fishing boots will certainly keep you warm as well as improve your productivity.

We have looked at multiple top footwear that claim to be some of the best when it comes to ice protection and we have chosen our top 5 that will keep you insulated and warm.
Before we simply just jump into the reviews, you should also know which features are the most important and these features could help you avoid buying bad boots and get the best possible value for your money.

Boot

Design

Warmth/Comfort
Rating

Price

Top Pick!

Baffin
Men's Wolf
Snow

$$

Kamik
Greenbay 4
Cold weather

$

Original
Muckboots
Arctic 
Outdoor

$$

Kamik
Canuck
Cold Weather

$

LaCrosse
Hunt Pac
Extreme 10"

$$


Most important features to consider when buying the top ice fishing footwear:

man catches a fish on ice

We have selected a few features that we consider vitally important. These features also formed part of the vetting process used to choose the best boots for ice fishing. If you are on the lookout for a pair of high-quality ice fishing footwear, we recommend that you make a mental note of these features and ensure that your boot does contain at least a few of them:

Insulation

The temperatures that you will face are arduous and having a decent insulation will keep your feet dry and warm on the inside. The colder the temperature, the more insulation you will need and while materials like fleece are lightweight, they do not offer the comfort and warmth.
Thinsulate technology is one of the oldest, yet reliable methods to keep your feet. It has been studied in numerous environments and it is lightweight.

Traction

Ice can be very slippery and ice grippers are not always in everyone’s budget. To ensure that you never stumble and fall, the outer sole needs to provide you with some decent traction.
The sizes of the lugs are a great place to start and they generally have more grip as the size increases. Rubber is also much better for providing you traction when compared to the other synthetic soles.

Man stands on ice with fishing gear

Liners

The inner liners are not only great for keeping you dry and warm but also helps to wick away the moisture that is caused by sweat buildup. Having a removable liner should be great after a long day at work.
You will have the opportunity of taking it out and letting it dry, or you could simply throw it in the washing machine and have it cleaned. Either way, the liner is important for comfort and for keeping you dry.

Midsole

If you find yourself tiring out or having sore feet at the end of the day, this could all be due to the quality of your midsole.
There are multiple different midsoles to choose from, but for ice fishing, we would definitely recommend the cushioned EVA midsole. This midsole can mold to the shape of your feet and should be perfect for anyone suffering from pronation and supination.

Weight

What is the point of softly walking on those volatile glaziers or surfaces if your boots are too heavy? The weight does matter when looking for ice fishing boots and a lightweight boot will not only reduce fatigue but improve the overall movement as well. The heavier boot might sound like it keeps your warmer, but this is not the case with today's new technology.

Man trying to catch fish on frozen lake

Ankle protection

Since your boot already keeps you from slipping, you might occasionally find yourself in the position where you could twist an ankle. This is where the ankle support comes in. The high-cut design automatically offers this if the boot opening is not too wide, but having something clinch your ankles will be fundamentally important to your safety. Having higher laces will also constrict the ankle and keep it without damage if you do accidentally slip.

Support

Last but certainly not least, you should consider having a decent shank. A steel shank might be a little too heavy, but nylon is softer and offers you adequate protection. The more expensive option will be carbon fiber. It should offer you solid support without adding too much weight to the boot.

Why wading boots are important icy conditions:

Freezing stream with snow

At times, you might need to slosh through streams of water to reach your intended destination. This is where wading boots are so effective. The boots need to be 100% waterproof, as the cold water could be harmful to your feet. Having decent wading features could also help you in reducing the risk of hypothermia on the ice.


Top 5 boots for ice fishing reviews in 2017

Now that you are somewhat of an expert when it comes to choosing ice-fishing boots, we have selected a few that we believe you might like. These boots were specifically selected as they do coincide with the features that you should look for when choosing a great pair and from keeping your feet and toes warm on the frozen lakes and snow. Here are the top 5 picks 2017:

Baffin Men's Wolf Snow Boot

The Baffin Men’s Wolf Snow Boot is quite different from any of the others on this list and it features the added benefit of great support.
Designed from leather and rubber, the boot is extremely durable and includes a lining that has been layered seven times. This not only keeps you insulated but adds to the padding as well.

The outer sole has been made from advanced thermoset polymers that will combine to give your warmth and protection.
The larger outer lugs are also ideal for traction and the soft EVA midsole will reduce fatigue, whilst molding to the shape of your feet.

How good are Baffin Boots?
Check the above video out and find out yourself

For all the technology included in the boot, you might expect it to be extremely expensive, but they are actually perfectly priced. There are boots with less technology that might cost you more and the addition of buckles will give you more support.

Pros

  • Fully insulated
  • Large outer sole lugs for traction
  • ​Offers great support
  • ​Comfortable EVA midsole
  • Extremely durable
  • Rated -40° Fahrenheit

Cons

  • The design is quite small and narrow(order larger size than usual)

Kamik Men's Greenbay 4 Cold-Weather Boot

The Kamik Men’s Greenbay 4 Cold-Weather Boot is designed from textile and synthetic materials. The boot is also extremely lightweight and features a unique Pulse rubber HE outsole that should keep you from sliding around on the ice.

These boots certainly excel in terms of providing you with insulation and they have been rated ideal for temperatures of up to -40 degrees Fahrenheit.
This footwear includes a Thermal Guard liner that can wick away moisture and should keep your feet dry at all times. The outer shell is made from nylon and while this does give up some durability, it will give you some added flexibility.

They are reasonably priced and we would certainly recommend it for your Arctic expeditions. Workers might find the boot comfortable, but the lack of durability should play a huge part in the long term.

Pros

  • Offers good insulation
  • Really affordable
  • ​Keeps you warm for up to -40° Fahrenheit
  • ​Lightweight

Cons

  • Lacks some durability
  • No insole is found inside, only felt inserts

The Original MuckBoots Adult Arctic Sport Boot

MuckBoots are known for all of their winter and rain boots. The Adult Arctic Sports Boot offers the perfect combination of sports flexibility and cold weather insulation.

Designed from CR flex-foam with 4-way stretch nylon. This gives the boot the added flexibility needed for tough terrains. The high-cut design should offer you decent ankle protection, whilst also keeping your legs warm. They are also 100% waterproof from the top to the bottom.

An added toe bumper has been placed at the front for your protection and the rubber outer sole should ensure that you have all the needed traction.

If you check the price you'll see they are quite expensive, but they certainly offer you long term use. The boot features a wide temperature range, which should be ideal for temperatures anywhere between -40 and -60 degrees Fahrenheit.

Pros

  • Fully waterproof and insulated
  • Flexible design
  • ​Comfortable midsole
  • Offers great traction

Cons

  • Quite expensive
  • The sole often times does wear out after prolonged use

Kamik Men's Canuck Cold Weather Boot

The Kamik Men’s Canuck Cold Weather Boot is good for ice fishing situations and you might find yourself on extremely slippery and sharp icicles.
The are designed from 1000 Denier nylon and this will give you a lot of durability when wearing them often.

Another feature that is include is a drawstring in the collar and this is designed to give you more versatility. As the sun comes out, you can loosen it, while tightening it for the cold. The rubber shell also lends to the durability and it is also fully waterproof.

These boots are really affordable and they would make the perfect fishing boots for freezing conditions. The design should keep you warm, while the added spikes on the outer sole ensure that you have maximum traction in every situation. We should also mention that the D-ring laces are much easier to lace up.

Pros

  • Waterproof and durable
  • Really affordable
  • Includes a drawstring for adjustability
  • ​Good moisture wicking properties

Cons

  • Very heavy design
  • The sizes run quite big
  • ​Extremely bulky

LaCrosse Hunt Pac Extreme 10'' Boot 2000gm Leather

The LaCrosse Hunt Pac Extreme is a well designed and extremely durable for cold icy conditions. The slip on lace up design is constructed from premium full grain leather and it features a nylon shank to give you that much-needed support.

They also includes 2000mg of Thinsulate in the inner lining. This will keep you warm, whilst it wicks away moisture caused by sweat. The reinforced heel and toe cap not only give you protection but will reduce the possibilities of abrasions setting in.

While these boots are quite expensive, it includes a specially designed outsole with uniquely patterned lugs. These will keep you from slipping in any conditions. It is important that they don't let water in and being 100% waterproof they will allow you to wade through streams if needed.

Pros

  • Good durability 
  • Offers added support
  • ​100% waterproof
  • ​Uniquely patterned outer sole lugs for traction
  • Includes a Thinsulate lining

Cons

  • Quite expensive
  • Quite a Heavy design 

And our top pick is...

Choosing the best boots for ice fishing is not the easiest task and with so many top boots, it is quite hard to say one is better than the other. We have made our choice based on which ones have the most features and offers you the most versatility.

For this edition, we would recommend the Baffin Men's, Wolf Snow Boot. This footwear is designed to be really durable and while there might not be any shank, the additional clips can be used for tightening and support. With their easy slip on design and adjustable clips you can loosen them in warmer conditions, so you have decent ventilation.

We would like to thank you for reading this ice fishing boots review edition and we do hope that you manage to find the best ice fishing boots that meets your needs. We would also like you to drop a comment in the section below and let us know if we might have missed any of your favorites.

Best Work Boots for Flat Feet (2018) Arch Supports

Finding work boots with good arch support requires careful research. A design that is good for one person may not work for another.

To make it as simple as possible we’ve put together this list of the best work boots for flat feet.

The best work footwear is vital if your occupation is in the labouring industry. To choose the right design for protection, comfort and stability you’ll need to think carefully about your needs. Anyone with flat feet has a harder task ahead of them.

Boot

Design

Support Rating

Price

Top Pick!

Justin Original
Double Comfort

$$

Wolverine 
Men's
Buccaneer

$

Caterpillar
Diagnostic 
Steel toe

$$

Timberland Pro
Pitboss 6"
Soft toe

$$

MuckBoots Chore
Steel toe

$$$

What are flat feet?

If you look under an adult foot you’ll usually notice an upward curve in the middle. This is the arch of the foot. Tendons form this arch which align with other tendons in the foot to support your feet.
When these tendons stretch the right amount, your foot will form a normal sized arch, when they don’t then there is little or no arch.

Cross section of flat feet foot arch

This is flat feet, a condition in which the arches of the feet become flat, placing the entire surface of your foot on the ground. While in most cases people are born with flat feet, some people can also develop it because of an accident, old age or standing for long periods on hard surfaces.
For people who work on their feet all day, this can be a big problem.

At first, the discomfort can be quite painless but over time it gets worse and worse until the very idea of standing up makes you shudder. Wearing improper footwear only worsens the problem.

The main symptom to look out for is discomfort or swelling in the feet after a day of intense standing activity. It usually comes in the form of pain in the heel or arch of your foot. A way you can test yourself to see if your feet may suffer from flatness is (although we always suggest seeking medical advice)

  • Get your feet wet
  • Stand on a level surface where your footprint will show
  • Step away and look at your prints. If you see full imprints of your feet then you may have a flat foot

If you find that you regularly have painful or swollen feet, that it’s difficult to stand on your toes and your feet tire out easily then it may be time for a trip to the doctor.
They can provide advice on ways to relieve the pain while in the meantime you can alleviate a great deal of the pain yourself by finding the best work boots.

What are the elements that make up the best boots for flat feet?

When you’re looking for footwear for flat feet there are a few characteristics to look out for. Depending on the type of work you do you may have different needs but we’ve tried to cover as much as possible in our selection.
The main qualities every type of work boot should have though are as follows:

  • Sole support – the right footwear will need a strong and firm sole that provides flexibility for all types of movement. For working footwear, shock absorption is always a good choice.
  • Durability – any footwear for work needs a high degree of durability to both protect your feet and last all year long. A low price will mean low quality so don’t skimp on this, you’re looking for a pair of boots that can really take a beating. Most work boots are made from leather or rubber, which can offer varying degrees of durability. Look out for footwear that is made from proven quality materials.
  • Comfort – for those with flat feet this will be their main concern. You’ll want footwear that provides long-lasting comfort and help alleviate the pain. You’ll be wearing these boots a lot and your day job may be in dangerous environments. If the comfort is not enough you may spend more time concentrating on the pain rather than your job or safety. Many brands stress their high level of comfort but the only way to find out is by testing them out for yourself.
  • Waterproofyour job might require waterproof work boots so look out for this feature to keep your feet dry.
  • Traction – whether you’re working inside or out, good traction will be important for keeping your foot in place. Test out the traction on each pair as you try them on.

Reviews of the Best Boots Flat Feet

Wolverine Men’s Buccaneer Boots

These are high-quality and perfect for those in need of durable waterproof boots. They give you great support for flat feet thanks to their multi-shock absorbing compression pads. These come molded directly on the outsole which along with the contour welt construction gives your foot full support.

The leather upper makes them both strong and durable while also keeping your feet warm and dry in even the worst conditions. The 6” lace-up shaft provides extra support and flexibility.

These boots feature a soft round toe, padded collar and breathable mesh lining. The rubber outsole provides excellent traction and benefits from the multi-shock absorbing pads that are built into the soles. They are so confident you’ll love these boots that they have been know to give a money back guarantee.

Pros

  • Non slip sole
  • Couture welt design gives great comfort
  • Shock resistance
  • ​High-quality leather design

Cons

  • No steel shank
  • Average insulation
  • ​May also need a flat foot insole for best support

Caterpillar Men’s Diagnostic Steel Toe Waterproof Boots

Value for money is always an important concern and Caterpillar does not disappoint with these boots. As one of the leading brands in work wear, you can expect top quality performance with these.

A firm sole provides flexible support which should alleviate any aches and pains thanks to its ERGO comfort system. This system mimics the shape of your foot providing support where you need it most.
A removable EVA gel insert also provides extra support. Lots of padding around the ankle provide extra cushioning and support.

For those working in dangerous environments, a reinforced steel toe provides much-needed protection from falling objects which combined with their electrical hazard protection, gives you the best safety possible.
If you're profession is in cold conditions, a patented thermal insulation can keep you warm in even the coldest conditions while a nylon lining wicks away any moisture.

Pros

  • Great foot support with - ERGO comfort system
  • Extreme durability
  • ​Great thermal protection
  • Tough steel toe
  • ​Electrical hazard protection
  • Light weight design 

Cons

  • Larger than normal boot sizing (buy a size smaller than normal)

Timberland Pro Men’s Pitboss Soft Toe Boots

Timberland came up with these boots to provide protection and comfort for any labor-intensive job. Whether you on road construction or high-rise scaffolding these boots will give you protection and comfort, along with a few other benefits.

The Pitboss provides the same level of slip resistance, electrical protection and shock resistance as other brands along with a 24/7 comfort suspension system which reduces foot fatigue.

With a padded collar and removable sock liner provide protection against blistering around the ankle. The breathable liner comes treated with an antimicrobial application to prevent odors.

For durability, a Goodyear welt construction provides a lasting chemical bond between the outsole and Nubian leather. Metal hooks secure the shoe laces making for a tight and comfortable fit.
A downside is that there not waterproof, only water resistant. Built form a combination of leather and plastic these are some sturdy boots equipped for any hard labor environment.

Pros

  • Stylish design made from high-quality materials
  • Antimicrobial application prevents odors
  • ​extra padding for comfort
  • ​Removable sock liner
  • 24/7 comfort suspension system

Cons

  • Not fully waterproof
  • Thick socks are needed for protection against the metal rings
  • ​Additional insoles may be needed for extra comfort

MuckBoots Chore Cool Steel-Toed Work Boots

While not as stylish as others on this list you will be getting some long-lasting weather resistant boots with these. Made in a Wellington boot style, the 14.75" shaft provides protection all the way from your feet up to your lower legs.

The synthetic uppers provide the best waterproofing possible without feeling too warm or restrictive.

A slight heel and arch support gives the comfort needed for flat feet while tough rubber soles provide excellent traction. All this combined with the steel cap make these one of the best steel toe work boots for flat feet.
These may be a little big for some people so make sure to try them on before purchasing. If you work in an area with changing conditions then these will provide all the protection needed against the elements.

Pros

  • Great protection from the elements
  • Extremely durable
  • Provides protection all the way to the lower legs
  • ​Good waterproofing design 

Cons

  • Hot during summer
  • Not suited for those with short legs
  • ​Can be uncomfortable if you don’t wear high socks

Justin Double Comfort 4760 Work Boots

If you liked what the Muckboots had to offer but want something more suited for cold climates or just a bit more stylish then, these are the boots for you.

Made from high-quality oiled leather, they are not only look great they also provide incredible protection. Highly durable and waterproof, these are also easy to slip on and off which make getting ready for work a lot simpler.

Easily the best thing about these is the level of comfort. Made up of seven different layers you simply won’t find another pair of boots with comparable comfort and protection.

The soles are made from high-quality rubber that offers great traction and shock absorption while the insole is cushioned to support flat feet.

Pros

  • Provides incredible comfort
  • Stylish design
  • flexible to move around in while staying durable
  • Grip on demand design

Cons

  • No steel toe
  • a little on the expensive side
  • Long break in period 
  • Sizes run narrow

Our Top Choice is...

It’s tough to decide on the best work boots for flat feet. Some are geared for specific situations and needs. For comfort and style, the Justin Double Comfort easily wins out. For protection and durability, the Muckboots take the spot.

But if we had to pick one that provides all the features mentioned at the start such as sole support, comfort, durability and protection than the top place goes to number 2 the Caterpillar Men's steel toe boots.

Those with flat feet will find excellent comfort thanks to its ERGO design and EVA gel inserts. For protection, the Caterpillar design is one of the best footwear for flat feet. Not to mention their incredible thermal protection which will keep your feet warm and dry for the entire day. The steel cap combined with their electrical hazard protection and all-round comfort make this our best choice.

Best Waterproof Work Boots | Keep your feet Dry

We’re sure that everyone agrees having soggy, miserable feet on the job is a no go.

Nothing is worse than feeling that slight hint of moisture seeping through the cracks knowing that it’s just the beginning, and your feet will soon be fully waterlogged for the rest of the day.

Worry not, we’ve composed this article to turn your feet into the ultimate waterproof warriors. Finding the best waterproof work boots can be a painstaking process of trial and error, so we went ahead and did all the legwork for you.

Let’s dive straight into the most important features, and then get into seven waterproof work boot reviews.

Boot

Design

Waterproof
Rating

Price

Top Pick!

Sketchers USA
Verdict 
Waterproof

$

Timberland
White Ledge

$$

Caterpillar
Diagnostic 
Hi Cut
Soft-toe

$$

Wolverine

Men's 
Buccaneer

$$

Chippewa USA
Waterproof
Insulated 
Safety-toe

$$$

Ariat Men's
Workhog
Pull-on H2O
Composite toe

$$

Keen Utility
Milwaukee
Wide Sole

$$


Look for these Features in Watertight Footwear

Waterproof Technology

water droplets on water resistant material

Naturally, we felt the need to cover the importance of different waterproof technologies first. The best waterproof boots for work will have multiple water resistant features that all work together to keep your feet dry and happy.

Boot Material

The first line of defense between your feet and the unforgiving water is the outside of your work boots. Leather is one of the most popular materials that best work boots are made with, and carries some natural water resistant properties.

Leather that is treated to be water resistant is a completely different from it’s non treated counterpart. Once treated, not only does it maintain its excellent durability, but it also repels water from entering your shoes.

If you’ve ever owned a pair of leather work boots that weren’t waterproofed and accidentally got them wet, then you’ve experienced the destructive power of water. The leather will become dried out, cracked, and slowly compromise the integrity of the leather.

Rubber 

rubber gum boot

It’s not uncommon for waterproof boots to come equipped with a rubber shell around the lower part of body. This is designed to provide an initial layer of protection over the leather and works great if you’ll be standing in shallow water.

While some may have more rubber surface area, it’s important to note that rubber is typically not as durable and long lasting as leather. Once the rubber begins to peel it can lead to water leaks and will also make the boot look visually worn out.

Want to see what rubber boots are capable of?
Check out the video above

Reinforced Seam Sealing

The seams of work boots are notorious areas for water to sneak its way in and also slowly decay the durability. Reinforced seam sealing will make sure that these weak points are watertight and ready to tackle the elements.

This is a necessary feature found in the best waterproof work boots that will be exposed to water because the seams are usually the first part of the boot that will begin to break down.

Internal Lining

Now that we’ve covered the external features, it’s time to look at what’s going to keep your feet protected from any water that may accidentally get in. Of course, even if water is kept out, you may be a victim of sweaty feet which can also cause significant discomfort.

Men look at safety footwear

Breathable mesh lining is typically the number one defense against internal moisture. This will help to keep you ventilated and cool while wicking moisture from your socks and feet. Breathable insoles are also great just to be sure you have full protection from all angles.

Sole Construction

You may not think that the way the sole is attached to the boot is directly relevant to waterproof boots, but is. As we covered above, the seams are usually the first part of work boots that begin to fall apart, but that’s not always the case.

Goodyear Welt Construction

This is the most durable and preferred sole construction type for waterproof work boots. The long lasting welt does a great job at keeping water out to prevent sole separation, but it also stands up the best to other common workplace hazards and rough conditions.

Should the soles wear out over time, you get the added benefit of being able to replace the soles instead of trashing the boots. One notable drawback would be the long break in time and heavier weight as a consequence of the increased durability.

Traction and Slip Resistance

man slipping caution sign

Not only does water destroy boots and cause discomfort, but it can also prove to be a serious safety hazard. Without a doubt, rubber soles are your go to solution to keep you on your feet and firmly grounded. You can’t do your job right if you’re slipping all over the place.

Depending on your job, you may be exposed to other slippery elements such as oil and chemicals, so check to make sure that whatever footwear you’re considering have all bases covered.

Another often overlooked feature is the quality of the traction. If you’re going to be walking over varied surfaces that are less than stable, you need deep, multi directional traction patterns that can grip and hold.

Direct Attach / Cement Construction

With this construction type, the sole is joined with the body of the boot by some kind of industrial adhesive. It offers a lightweight alternative to the Goodyear welt construction, and also provides a shorter break in period with more flexibility.

The drawback of this construction type is the lack of durability. Since the seal is completely exposed to the elements, it’s prone to degrading and leading to a separation of the sole from the body of the boot.

Best of Both Worlds

In some rare cases, boots will be made with a combination of both a Goodyear welt and direct attach. This provides you with the ultimate durability and benefits from both construction types.

Waterproof Socks

Navy men working using hose

What better to compliment your shiny new work boots than a pair of high-quality socks that give you an extra layer of protection and confidence. No matter how great the boots are, the right socks can give you extra comfort, support, and of course, water resistance.

It’s best to pick out your socks once you have the boots so you can decide on the thickness and features you’re targeting. For instance, if the footwear has poor breathability, you may want socks that offer extra ventilation.

There are multiple brands out there, but we’ve gone ahead and compiled a quick list of the best:

  • Dexshell
  • Sealskinz
  • Hanz
  • Camaro
  • Rocky Gore-Tex

The Best Waterproof Work Boots Reviews

Skechers USA Men’s Verdict Waterproof Boot

Right off the bat, you’ll notice the sleek, casual design of these work boots. Smooth waterproof leather meets a durable Goodyear welt construction granting them the excellent ability to stand up to the rough wear and tear of job sites.

To make these boots watertight, the seams have been sealed and reinforced to ensure you stay high and dry.
Should any water or moisture happen to get in, worry not, the breathable and cooling memory foam insert will provide you with both comfort and moisture wicking.

A durable set of rubber lug soles finishes these boots off, providing high-quality, deep traction patterns optimized for gripping any surface you may come up against. For the affordable price tag, these boots are tough to beat and should be on any workers radar.

Pros

  • Durable, long lasting construction
  • Non slip traction
  • ​Excellent comfort features
  • ​Energy return with each step
  • Good for work or casual wear

Cons

  • Heavy design
  • Insulation can get warm

Timberland Men’s White Ledge Waterproof Boot

Naturally, Timberlands best selling boot had to make this list. Gorgeous rugged full grain leather wraps these boots creating an impregnable waterproof fortress for your feet, complete with reinforced seam sealing.

Both the sole and midsole are comprised of Timberlands special traction and support technology so you can be confident in your footing on both unstable terrain and slick surfaces. The technology also provides you with great energy return so you can stay on your feet longer.

Along the top of these boots, a reliable gusset tongue will ensure that no debris enters the domain of your feet. On top of that, your feet will be surrounded by a comforting, breathable lining and footbed.

Pros

  • Great traction on all surfaces
  • Secure fit with ankle support
  • ​Comfort that lasts during long work shifts
  • ​Durable scuff resistant leather

Cons

  • They need better arch support
  • Poor breathability
  • ​Prone to leaks in deep water

Caterpillar Men’s Diagnostic Hi Cut Soft Toe Waterproof Boot

Caterpillar wasn’t playing around when they created this heavy duty waterproof boots. Aside from the durable waterproof leather, these boots really stand out for their specialty comfort features known as the ERGO system.

This anatomically correct technology is designed to support your feet and natural step motion so you can enjoy maximum comfort and fatigue resistance.
If you happen to work in chilly conditions, then you should really consider these boots due to their built in 200 grams of insulation.

Breathable mesh internal lining ensures that it never gets too warm inside, and a removable gel insole gives you responsive comfort that lasts as long as these boots wear. While they’re not the cheapest boots on this list, they’re equipped with features that more than justify the price tag.

Pros

  • Good for cold environments
  • Flexible soles
  • ​Roomy and comfortable toes
  • ​Great support system
  • True to fit

Cons

  • Lack of durability
  • Waterproofing deteriorates over time
  • ​Bulky exterior
  • Sole prone to separation

Wolverine Men’s W04821 Buccaneer Work Boot

Right out of the box, you’ll notice these boots demand attention. The dark, supple leather and matching laces make these great for both work wear and casual wear if you want to impress some friends.

What really makes these boots special is the contour welt construction combining both the Goodyear welt and direct attach construction methods. This makes the slip resistant rubber soles extremely flexible without sacrificing any durability over the long haul.

The padded breathable tongue gives you ample ankle support and comfort while the shock absorbing cushions handle all of the beatings to your feet don’t have to. Lastly, whether you have narrow or wide feet, these boots come with a selectable width option to ensure a true fit.

Pros

  • Lightweight but durable design
  • No break in period
  • ​Flexible sole and welt construction
  • ​Excellent surface gripping

Cons

  • Lacing hooks are prone to breaking
  • Sizing can be difficult
  • ​Toe area prone to being tight

Chippewa Men’s 9” Waterproof Insulated Steel-Toe EH Logger Boot

What makes these boots truly special is the time and care that went into crafting them, as well as the tall design. Fully wrapped in Chippewa signature durable waterproof leather, the yellow Vibram soles provide superior traction and durability no matter the surfaces you wear them on.

The Goodyear welt construction meets extra waterproof support to ensure the longest lasting durability. These are particularly great for jobs that require safety toe protection because they come equipped with heavy duty steel toes that also meet electrical hazard safety standards.

Finally, these heavy duty warm boots come lined with 400 grams of insulation and multiple layers of moisture wicking protection and comfort. They’re going to cost you a pretty penny, but they’re sure to last you long past they’re worth.

Pros

  • Tall build for deep water conditions
  • Excellent ankle support and comfort
  • ​Durable soles
  • ​Great insulation and comfort features
  • Thick long lasting leather

Cons

  • Long, stiff break in
  • Prone to some leaks
  • ​Run small and tight
  • Can be hard to put on and take off

Ariat Men’s Workhog Pull-On H2O Work Boot

For workers needing to out the door quickly, these waterproof pull-on boots are for you. Ariat prides themselves for the innovative U-Turn technology that makes these boots easy to slip-on no matter the shape of your foot.

Full waterproof leather covers these boots from ankle to the durable sole which is resistant to slips, oil, and abrasions.
Between the 5 different layers of comfort technology, you’re sure to have comfortable feet no matter how long the work day drags on for.

The tall ten-inch design makes these ideal for conditions where you may encounter deeper water. Comes with a safety toe made of composite materials. Simplistic design allows you the versatility to wear these boots just about anywhere, so don’t be shy!

Pros

  • Great scuff resistance
  • High design keeps water out
  • ​Great traction and damage resistant soles
  • ​Snug fit with easy on and off wear
  • Superior arch support

Cons

  • Heel area prone to causing blisters
  • Safety toe lacks sufficient protection
  • ​Not ideal for hot environments

KEEN Utility Men’s Milwaukee Wide Work Boot

KEEN has done it again and provides workers with an excellent work boot built with a combination of both waterproof leather and textile. To ensure a snug fit, metal eyelets and locking hooks line the upper boot and house durable laces.

While it already comes with a heavy duty safety steel cap, these boots provide an extra layer of protection by wrapping the durable rubber soles up and around the toe area. With comfort in mind, the toe area provides ample wiggle room.

Of course, these boots were built for stomping your way through swampy conditions by providing both waterproof features and superior breathability focused on moisture dissipation. For carrying the reliable KEEN name, these boots are a steal for the price.

Pros

  • Lightweight with heavy duty features
  • Full foot comfort
  • ​Toe protection with roomy fit
  • ​Superior slip resistance
  • Stands up to the toughest work sites

Cons

  • Sizing chart is difficult
  • Lacing hardware prone to breaking
  • ​Rubber toe lacks durability
  • Could use extra waterproofing

And the Winner is...

In this review, we’ve covered a lot of the top brands and multiple boots that are suited for a variety of work conditions. The ones that stood out to us the most and stand as the chosen winner of the best waterproof work boots are the Skechers USA Men’s Verdict Waterproof Boot.

Not only do they come with multiple waterproof features from outside to in, but the comfort padding and durable, gripping rubber soles make them a versatile choice. They come armed with a Goodyear welt construction and even steel shanks for extra support.

Whatever the job, these comfortable waterproof work boots will stand up against the rigors of the workplace while being stylish enough for everyday wear.

Best Logger Boots – Take Comfort and Protection to the Next Level

Loggers are in constant need of protection and safety. You will have to endure many challenging terrains and conditions. 

This is where the best logger boots will help ensure that you have the safety and comfort for dangerous tasks and for prolonged hours on your feet.

We have decided to look at the top logger boots and show you the most important features to consider in your searching endeavor. In this article, you will learn how to choose these work boots to ensure you get great value for your money and we have included our top 5 to help you get started.

Boot

Design

Comfort Rating

Price

Top Pick!

Chippewa 9"
Waterproof
Insulated 
Steel-toe

$$$

Georgia
Loggers

$$

Carolina 8"
Insulated
Steel-toe

$$

Georgia Men's
Logger 8"
Non-steel toe

$$

Wolverine
Men's
Chesapeake

$$

Key Features when choosing The Best Logging Boots

man cuts tree with chainsaw and safety gear

Sizing, style, and feel are three things they always preach when looking for comfortable work boots, but logging is a little different and the right footwear can make a huge difference.
The features we have used in this buyer's guide have also been used by our professionals in their process of choosing the top five and even if you do not agree, these features will definitely come in handy:

Materials

The materials or the construction of the boot is fundamentally important and the type of materials that have been used should give you a good idea of the quality and durability.
Leather and rubber are the most common types that you will find and they both have their advantages and drawbacks.

The leather is great for prolonged use and has the capabilities of enduring almost any environment, while rubber is much cheaper, but will be better when it comes to keeping out the water.
One of the best combinations of these two materials will be when the upper is constructed of leather and the outer sole is made from rubber.

Are Logger Boots Comfortable

Since fellers need to spend prolonged periods on their feet, it should come as no surprise the inner sole is fundamentally important.
The inner sole should be ideal for helping to reduce the possibility of fatigue and while most of the population is suffering from either pronation or supination, the inner sole will be that much more important.

If you manage to find a boot with EVA foam cushioning or PU cushioning, this should be perfect to keep your feet safe while not compromising comfortability. We also recommend that you look for abrasion resistance in the lining as this could also keep you from those stubborn walking pains.

Safety 

logger cutting tree protective gear

Safety is also a big part of choosing logging boots and the safety is generally found in the design and the toe area.
Soft toe boots are great for working in normal conditions, but the steel or composite toe boots will be a little safer outdoors. Depending on your expertise and area of work, you will need to look into this.

The support system also links to safety and the shank can either by made from steel or other materials such as composite toe work footwear. The addition of a steel shank will keep your feet from twisting and they also offer great additional support.

Slip Resistance 

Slippery logs and tinder could certainly become hazardous without the correct footwear.
The heavy machinery need for operating in this job can amplify the situation and this is really why you should take great care in making sure your footwear is slip resistant.

The wider apart these lugs are from one another, the better they will be in terms of keeping you from falling and slipping. We would also recommend that you consider looking for harder rubber as this will not only improve the overall durability but also greatly improve the resistant to slip on watery patches.

Waterproof

Waterproofing is something that is very important, not only for your feet but for the shoes as well. Once the water gets inside, it can compromise the inner sole and your feet will also start to smell.
While rubber is much more waterproof than the leather, the leather can also be treated with a water-repellent substance. This is quite expensive, but your boot will last you longer and ensure more comfort in the longer term.

Insulation 

Logs in snow

Keeping your feet insulated will be important in those colder conditions and while logger footwear also does offer you the ability to do this with the addition of a lining, you should ensure that you look for the best.

Gore-Tex is one of our favorite linings and it not only helps to keep out the water but will keep the cold out as well. The only downside with Gore-Tex is the lack of ventilation one might come across, but this is a sacrifice we are willing to make in the cold of the forest.


Top 5 Logger Boots of 2018 Reviews

Now that you are almost a pro at selecting the best logging boots, you might not have any idea of where to start and which brands are the best.

We have selected or top 5 that should simplify life for you and allow you to get a head start in your job. These 5 have been carefully selected and they should be perfect for anyone in the logging industry.

Chippewa Men's 9" Waterproof Insulated Steel-Toe EH Logger Boot

Chippewa are some of the most well-known boots in the US and they have been handcrafted and specifically tailored since 1980.

They are also constructed from premium grade leather and they feature a thickly threaded outer rubber sole.
They have wider lugs than one would normally find and they will certainly ensure that you never slip and fall on those slippery logs.

Chippewa has also put a premium on safety with these boots and the combination of the steel toe and the outer sole, which has the capabilities of resisting electric and magnetic charges, has helped thm exceed the ASTM F2413-05 standards for impact and compression.

The Chip-A-Tex waterproof membrane that has been added to reduce the chance of your feet getting soaked will also provide some decent ventilation. The added Dri-Lex technology in the lining has been incorporated to wick away sweat and moisture quickly.

They're are also quite expensive, but we have noticed that the best work boots do cost a little extra. This extra cost also turns out to be worth it more often than not. We would also recommend this boot for a wide variety of jobs, but fellers should get great benefit out of using them.​

Pros

  • Waterproof and good ventilation
  • Strong steel shank for added support
  • Inner lining wicks away moisture and keeps you dry
  • Superior quality 
  • Stylish leather design

Cons

  • Really expensive
  • Sizes can run a little large

Georgia Boot Men's Loggers G7313

The Georgia Boot Men’s Loggers work boot is designed from premium grade leather. This leather means that the boot should be that much more durable and should be capable of lasting you many a year.

The leather has also been treated with a water repelling oil to ensure that you do not have to worry about having wet feet. This will certainly come handy when trekking in those extremely wet conditions.

The outsole is made from hardened rubber and this not only adds to the durability of the boot, but it also ensures that the boot stays slip-resistant.
The addition of the steel toe will further enhance the ability to resist abrasions, while also keeping your feet fully protected from falling lugs and stubs.

A polyurethane inner sole is included and this will help mold to the shape of your feet. This should be ideal for those suffering from pronation and supination.
When the sole gets worn out, you could simply just remove it and replace it with a new one. This is great for anyone working with a medically advised inner sole.

These work boots are quite expensive but definitely worth the price. We love the overall durability and the comfort it provides and they will be highly recommended for anyoe working in the tree . They are also quite versatile and many people are using them in the construction and farming industries as well.

Pros

  • Exceptional durability
  • Abrasion resistant
  • Waterproof
  • Added safety with the steel toe

Cons

  • Quite expensive
  • Have a narrow fit
  • Long break in period

Men's Carolina Logger Boots Review - 8 inch 600 Grams Thinsulate 

The Men’s Carolina 8-inch 600 grams Thinsulate Steel toe logger boots are designed from top quality Briar Pitstop leather and they feature a hardened steel shank to give you that much need durability.

The boots also include a hardened one-piece leather outer sole and this includes the Sure-Grip technology, which means that your feet will stay firmly planted when you place them on one of those slippery logs.

These boots include 600grams of Thinsulate insulation and this is a perfect way to keep the water out, while simultaneously providing you with some great ventilation capabilities.
A steel toe has also been included for enhanced protection and safety, while the comfortable inner cushioning will mold perfectly to the shape of your feet.

They are actually quite affordable and they offer great versatility as they are used for many other working ventures besides logging.
We will certainly recommend them for their quality and the affordability as they offer a great way for you to keep your feet protected and takes safety to a whole new level at an affordable price.​

Pros

  • Really affordable
  • Waterproof
  • Includes Sure-Grip technology
  • Excellent durability

Cons

  • Designed for narrow footed people and you might need to go one size bigger
  • Lacks some padding and arch support
  • Causes some abrasions in the lower lacing area

Georgia Boot Men's Logger 8" Black Non Steel Toe Work Boot

If you are looking for something a little different, the Georgia Boot Men's Logger 8-inch Black Non-Steel toe work boot should be the perfect addition for you.

These boots are also handcrafted from top premium grade leather, but the softer leather design does make them a little more flexible.
The hardened rubber lug outsole features wider lugs that should keep you from slipping and this will not only be on water spills, as your feet will stay planted in oily messes as well.

A polyurethane innersole has been used for the cushioning insert and this can also be removed if needed.
This inner sole will mold to the shape of your feet and it has proven to be perfect for those suffering from pronation and supination.

Georgia's shoes and footwear is generally expensive, but these are actually really affordable when comparing them to the others.
These work boots should be perfect for loggers and the high-cut design is great for keeping out unwanted water and creatures from getting inside. The only real downside is the average lining and it does tend to wear over time.

Pros

  • Softer leather for more flexibility
  • Fashionable design
  • Great for pronation and supination
  • Includes a speed lacing system for fast lacing
  • Reasonably priced

Cons

  • Inner lining does tend to wear and tear
  • The boot is also quite heavy

Wolverine Men's W05523 Chesapeake Boot

Last but certainly not least, we have the Wolverine men’s W05523 Chesapeak and this boot features a stylish tall dark and handsome design.
The boot is once again made from premium leather and has been oiled to help ensure that water cannot penetrate.
If the water does penetrate, the addition of mesh lining should keep the water out and help wick away in stubborn moisture.

They feature not one, but two shanks for added support and comfort. The heavier steel shanks should keep you balanced and offer great support, while the nylon shank is included to enhance the comfort of the boot.The safety toe on this boot also meets ASTM F2413-11 safety standards and the removable cushioning is designed to maximize comfort.

This cushioning can also be removed and replace with additional insole like memory foam of polyurethane.

As for the pricing, they're priced fairly in the middle and should be a great buy for not only loggers, but farmers as well. Gore-Tex is generally expensive, but with this boot you will have this additional and durable benefit.

Pros

  • Exceptional support with the steel and nylon shanks
  • Meets ASTM F2413-11 safety standards
  • Includes Gore-Tex lining
  • Fairly priced

Cons


And our winner is...

Reviewing these high-quality boots was quite tricky and finding the best one out of the best five is also not the easiest thing to do, but we have decided that the Chippewa Men's 9" Waterproof Insulated Steel-Toe EH Logger Boot is the natural winner and this boot is very similar to the others, but we like the additional features.

The added electrical hazard and magnetic charge protection does make it perfect for multifunctional use. This footwear has been tested with all of the key features and this is one of the main reasons we have decided to select it.

We would like to thank you for reading this article and we certainly do hope that you have managed to find the best logger boots to suit your needs. Please let us know in the comment section if we missed any of your favorites and if you have any experience with these boots.

Best Winter Work Boots | Insulated and Warm

It’s that time of year again - winter is on it’s way and the temperatures are already beginning to drop. Your current pair of boots won’t cut it, and you’ll soon have to rely on a pair of the best winter work boots to get you through the icy months ahead.

If your job exposes you to the harsh winter elements like snow and slush, or even if you work in a freezing warehouse, having the good insulated footwear is the difference between comfort and misery. Don’t worry, we’ve got you covered.

We’re going to start by identifying the most important factors in footwear for working in cold climates, and then review the nine warmest to handle icy conditions of any kind.

Boot

Design

OVERALL RATING

Price

Top Pick!

Carhartt
RuggedFlex
Safety-toe

$$$

Columbia
Bugaboot
Plus Cold
Weather

$$

Chippewa
Waterproof
Insulated

$$$

Sorel
Men's
Conquest

$$

Kamik
Nationplus
Snow

$$

Dream Pairs
Rubber
Winter Snow
Rain

$

Wolverine
Gold 6"
Insulated

$$

Timberland
Chillberg Tall
Insulation

$$

Keen Utility
Composite-toe
Insulated

$$$


What you should look for in Good Insulated Boots

Insulation

Man cuts down tree in snow chainsaw

First and foremost, you’re going to need the best insulated work boots that can keep the warmth in and the cold out. When you’re stomping your way through snow banks or step through some puddles of icy and unforgiving slush, the true beauty of insulation will shine through.

Thinsulate

There are a couple of different materials that are good for insulation, but without a doubt, Thinsulate is king. Acting as a thin layer of insulating material, it’s designed to retain your natural body heat within the boot while resisting the cold.

Depending on the types of temperatures you’re going to be exposed to, there are different levels of insulation that can get the job done:

200 grams
This is going to be your basic level of cold protection. It can handle chilly weather and won’t make your feet sweat from movement.

400 grams
This level of insulation is designed to handle very cold weather. If you’re going to be standing in snow and experiencing below freezing temperatures on the regular, 400 grams should do the trick.

600 grams
Getting into the heavy duty side of things, 600 grams will have you covered in temperatures that are regularly way below freezing.

800 grams
Build to withstand the extreme cold, this level of protection will keep the cold out at all costs. Naturally, that also means your foot will be more prone to sweating inside if you’re active a lot.

1000 grams
Imagine lighting a furnace in your boots. Few people actually need this much insulation, but if you’re going to be standing in snowy, double digit negative temperatures, it’s the best.

Freezing temperature scale

Another great feature about Thinsulate is how thin it is. It’s extremely lightweight, hence why it’s the most common insulation material that companies turn to when making cold weather shoes.

PrimaLoft

PrimaLoft is another tried and true form of insulation that is less used than Thinsulate. This synthetic material acts as a built in layer of insulation that comes in different weights depending on the level of protection you need.

One of the massive advantages it has over common down forms of insulation is that it can get wet. PrimaLoft has great breathability and the versatility to withstand moisture without becoming ruined and leaving your feet in cold, soggy conditions.

Removable Wool/Felt Liners

It’s a pretty straightforward and reliable form of insulation. Wool and felt liners have been around for quite some time, and still, stand to be some of the best forms of insulation. The removable feature makes it easy to dry your boots between wear and maintain the liners for maximum life.

Waterproof/Water Resistant

water droplets on waterproof material

This is a particularly important feature to look for if you’re going to be working in the snow (or even worse, cold rain). As soon as water gets into your boot and the temperatures are freezing, you might as well call it a day.

A lot of the best winter work boots come built with a standard waterproof design. This is usually accomplished with a combination of waterproofed leather, and some kind of rubber shell.

You’ll also want to double check and make sure the seams are sealed. Water is sneaky and has an annoying ability to seep in through the smallest of openings.

One final waterproof feature you may want to look for is a gusset tongue. This is especially important if you’re going to be trekking through deep snow so none of it seeps in through the top of your boot.

Composite Components

Any material that can conduct cold temperatures, you’ll want to avoid. Steel, while offering a high level of durability and support, can be one of many factors leading to cold feet.

Steel toes and steel shanks are the primary culprits that are prone to getting chilly as temperatures drop. Instead, look to their composite counterparts, such as composite toe work boots, to keep you safe and offer support without sacrificing the boots insulation.

Boot Height

This probably wasn’t one of the important factors coming to mind when searching for the best cold weather work boots. There are two main categories that a boot will fall under: ankle and mid-calf. Which one is right you really depends on the application.

two men working on ice

Ankle boots

This type of boot is going to be easier to get on and off. However, since it’s shorter, it’s not going to be as warm. Also, they will be more prone to letting water, ice or snow seep in through the top of the opening.

Mid-Calf

These boots are going to stand taller, and offer a better level of insulation and make for a warmer experience. They’re ideal for jobs where you’ll be exposed to deep snow or puddles, but they’re harder to get on and off.

Durability

If you're working in freezing conditions, your footwear is going to be exposed to rougher than usual elements. Water is one of the worst enemies of work boots. It slowly decays the seams, bonding, rusts metal and can even compromise the internal lining.

Jobs that require cold weather footwear also usually expose the wearer to very rough terrains. You’re going to need durable soles that can withstand a constant beating and give you longest life span.

Non Slip Work Boots

Man shovels snow on slippery ice

Not only do you want to have durable soles like mentioned above, but you also need advanced traction. In colder environments, you will be more prone to encountering ice, snow, and wet surfaces which are all slip hazards.

Flexible, advanced tread patterns will help to make sure that your footing is stable so you can focus on work without the worry of falling. You may also want to consider purchasing an attachable traction system if you’re going to be in particularly frigid temperatures with lots of ice and thick snow.

These systems usually incorporate some kind of chain or spike feature. This helps you grip the unforgiving surfaces of winter easier, and will ultimately help you conserve energy while staving off fatigue.

Warm Socks

Even the warmest winter work boots need a pair of quality socks to add an extra layer of insulating protection. We’re going to save you a lot of pain and suffering and tell you to avoid cotton socks at all costs.

Cotton is a great material for other seasons during the year, but it has poor insulation value and it keeps moisture locked in. Instead, consider socks made from wool, shearling, fleece, or other synthetic materials.

The key features you want in your socks are comfort and breathability. Thicker socks are going to give you additional cushioning, and also insulate better than thinner socks adding to the overall warmth of your feet. However, thinner socks will be able to breath more and work well with boots that already have high-grade insulation.


Know Your Work Environment

Before we dive into the boot reviews, in order pick and be happy with the best pair for your job, you have to know what kind of challenges you will be facing. It’s easier said than done, so we’ve compiled a quick questionnaire to make life easy.

  • How cold will it get?
  • Will you be exposed to snow, slush, or rain? (Maybe all three)
  • Do you walk on frozen surfaces?
  • If snow will be present, how deep does it get?

If you’ve got a good idea of the features you want in your ideal pair of winter work boots, let’s get started.


Warm Work Boots Reviews

Columbia Men’s Bugaboot Plus III Omni Cold-Weather Boot

These visually appealing boots live up to the look. They’re ankle high and easy to get on thanks to the semi-elastic laces and built with a durable combination of leather and nylon.

They will feel exceptionally light on the feet and offer a waterproof seam sealed shell on the lower part for any puddles of slush that you may step in. On top of a nice dry fit, the 200 grams of insulation will ensure your feet stay toasty in chilly conditions.

Columbia also incorporates some great built in comfort features that allow you to be on your feet for hours on end. To top them off, they come with increased treading to counter common slip hazards in the frigid environment.

Pros

  • Long lasting foot comfort
  • Lightweight design
  • Great arch support for those with foot problems
  • Excellent traction
  • Stylish for casual and business wear

Cons

  • Poor breathability
  • Insulation could be better
  • Waterproof shell prone to leaks

Sorel Men’s Conquest Boot

These boots look ready to equip you for climbing mount Everest. The sleek design starts with a rubber shell around the base for increased water resistance, followed by a full leather body.

The half-calf design is built for deep snow trekking and even incorporates adjustable gaiters to keep any snow, ice and frost away from your feet. For maximum stability, they have an adjustable strap around the ankle to ensure a snug and secure fit.

Featuring 400 grams of Thinsulate, these warm workboots are equipped to take on freezing temperatures with ease. Built in EVA midsoles and insoles will help to provide you with sustained comfort wherever your day takes you.

Pros

  • Good insulation for extreme cold
  • Adjustable comfort features
  • Protective, thick soles
  • Short break in period
  • Gaiters for deep snow

Cons

  • Leather to rubber joints lack durability
  • Ankle area can cause discomfort
  • Toe area prone to getting cold
  • Comfort features wear out fast

Kamik Men’s Nationplus Boot

Half-calf construction meets a durable leather and rubber design. The tough waterproof exterior is completed with a waterproof gusset tongue to keep snow and debris out.

These boots are rated for minus 40 degrees Fahrenheit and feature a removable 200 gram Thinsulate liner for added cold protection. Being removable, it also makes cleaning and maintaining these boots very easy.

The moisture wicking lining along the inside helps to dissipate any sweat that may form. With an extremely affordable price tag, these heavy duty work boots should be on anyone’s radar.

Pros

  • Keeps the feet warm through the toes
  • Tall design can handle deep snow
  • Comfortable internal padding
  • Slip resistant durable soles

Cons

  • Poor support for the feet
  • Hard to get on and off
  • Thin soles are prone to getting cold

DREAM PAIRS Men’s Rubber Sole Winter Snow Rain Boots

For an affordable pair of utility boots, you’ll be hard pressed to find a more qualified pair. These slip on rubber boots are not meant for long term wear, but ideal for smaller, short term jobs that require heavy protection.

The full rubber design makes them completely watertight. At the top, they’re finished off with a padded collar and tongue for comfort and further insulation.

Along the inside, your feet will be greeted by comfortable, warm fur lining. Insulation is handled by a thin reflective heat layer to keep your feet feeling good while you get work done.

Pros

  • Affordable utility boots
  • Dual lining provides ample insulation
  • Durable long lasting design
  • High quality traction

Cons

  • Internal lining lacks durability
  • Bulky and heavy
  • Prone to absorbing and retaining bad foot odor

Chippewa Men’s 29416 Eight-Inch Waterproof Insulated Work Boot

The Chippewa brand has done it again and knocked it out of the park with these cold condition work boots. The extreme durable leather is only the beginning of the waterproof features as these boots pack reinforced seam sealing, and a waterproof internal lining.

A long lasting Goodyear welt construction meets Vibram soles to ensure you’re not slipping around the workplace. They’re packed with high-grade insulation that will keep you warm in the coldest of conditions.

While they don’t carry the most affordable price tag around, they’re well worth it. This toasty work footwear carry the reliable Chippewa name and are ready to tackle cold weather challenges.

Pros

  • Great heel and ankle support
  • Comfortable internal lining
  • Long lasting leather
  • Breathable for both winter and spring
  • Durable Goodyear welt

Cons

  • Long break in period
  • Insoles lack durability
  • Seams are prone to leaks over time
  • Laces feel cheap

Wolverine Men’s Gold 6-Inch Insulated Waterproof Boot

These Wolverine boots mean business. They come wrapped in an aesthetically pleasing nubuck leather which offers natural water resistance. The slip, abrasion, chemical, and heat resistant soles with a durable direct attach make them extremely versatile.

Along the inside, you’ll find both warmth and comfort with 400 grams of Thinsulate and a breathable mesh lining to keep you dry. Between the removable insole and built in nylon shank, these boots offer superior comfort and support.

They are packed with so many features including the reliability of the Wolverine brand, they come with a very affordable and attractive price tag.

Pros

  • They hold up well against rain and snow
  • High-grade insulation
  • Great support features for flat feet
  • Lightweight build
  • Added support from shank

Cons

  • Seams are prone to splitting
  • Toe area can cause discomfort
  • Run narrow
  • Feel stiff at first

Timberland Men’s Chillberg Tall Insulated Boot

To be environmentally friendly, Timberland has made portions of this boot from recycled materials. But, don’t let that fool you, they are both durable and stylish.

Beautiful full grain leather is lined with rustproof eyelets to increase the wear life, and topped off with a gusseted tongue to prevent anything from entering your boots and causing discomfort. The inside is lined with both warming fleece and 400 grams of PrimaLoft to provide toasty warmth even in deep snow.

Finishing with great traction and a rubber sole, they have great shock absorption for handling rough terrain and unstable surfaces that winter jobs may put you up against.