How to Waterproof Boots – 4 easy steps Leather and Fabric

Here are some of the top tested ways that you can waterproof your boots easily. These methods will certainly help improve the lifespan and rejuvenate their durability.

Waterproof work boots are essential in wet conditions. Quite regularly you will find you have to make your footwear water-resistant yourself.
(Check our reviews of top-rated waterproof work boots here)

Once you know how to make your boots watertight effectively, you will be able to buy any pair on the market and still make them impervious to the conditions.

The best way of waterproofing leather boots:

Leather is one of the toughest materials on the market and naturally, it also has waterproof properties. Over time, this might wear off and they will be left vulnerable. Nikwax is one of the best waterproofing for leather boots that you could find on the market today.
(Best light weight boots here)

1. Wash the boots:

Before waterproofing leather boots, you will need to ensure they are thoroughly cleaned. Take your time to wash them, get all of the dirt, and grime out as this could reduce the effectiveness of the wax when applied.

2. Apply the wax:

Next, you’ll need to apply the wax. This should be added to a cloth and gently rubbed all over the leather upper. You may also need to heat up the wax if you find it too hard to apply. This can be done with a hairdryer. You can repeat the process if needed.

3. Leave them to dry naturally:

The boots should be left to dry naturally and this could take anywhere between 30 and 90 minutes, depending on the amount of leather on the footwear.
When it comes to making footwear water resistant , especially leather, you will need to do the process and wait for them to dry naturally. While drying it with heat might be tempting, this is counter-intuitive and the leather might even start to crack.

4. Buff off the wax:

Finally, you should buff off the wax when you are done. This gives them back that natural look and feel. The excess wax can be discarded and you will be able to use them in the rain once again.

Waterproofing Fabric boots:

Fabric boots are a little different and they might even be easier to waterproof or reproof than leather. Leather shoes occasionally contain fabric as well and these steps will help you when you when it comes to taking care of any textile fabrics:

1. Thoroughly clean the exterior:

Ensuring that they are clean is once again the first and one of the most important steps you need to implement. Since you will be using a spray, you will need all of the dirt and grime removed.

2. Apply the spray:

Holding the spray around 2-3 inches away from your footwear, and gently start spraying it all over the fabric. Ensure that all the fabric parts are evenly covered. With fabric, you have the ability to re-proof them whether they or wet or dry.

3. Leave to air dry:

Once again, it is important to let them dry naturally and not to apply any type of heat to the process. This might take a while, but with fabric, you do not need to buff off the excess. It can simply be wiped off.

Waterproof Suede or Nubuck:

Waterproofing suede or Nubuck is basically the same process as the fabric boots. A wax won’t generally work on something as rugged and it is better for leather materials. Boot waterproofing is an important way to protect your work footwear and these steps will help you with suede and Nubuck footwear:

1. Thoroughly clean the exterior:

Regular cleaning of any footwear is fundamentally important when it comes to increasing the lifespan, but before re-proofing, this becomes imperative and you should remove all of the dirt and grime first.
(For a full guide how to clean your work boots properly click here)

2. Apply the Spray and leave to dry:

Similarly, to the fabric uppers, you will also use a spray at around 2-3 inches from the shoes. Ensure that you have not missed any sports and they are all covered evenly. Once this is done, it should be left to naturally air dry and not sped up with additional heat.

3. Brush off the excess:

A normal shoe brush is perfect for removing the excess spray once it has fully dried out. The excess can easily be removed and they will be ready for any weather conditions you need to face at your job.

Why is Waterproofing Work Footwear Important?

Buying boots is quite simple, but not everyone knows how to waterproof boots and this is something that is extremely important when it comes to the longevity of any of your footwear and keeping your feet dry.

We really hope that you have found these tips helpful and we would like to thank you for reading this article. Please let us know in the comment section if how these steps worked for you or if you have another effective method.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: